Sachs engines have be used by numerous manufacturers including
Achilles,
AIM,
Ancillotti,
Anker,
Aprilia,
Arctic
Cat,
Aspes,
Bauer,
Cyrus,
Dalesman,
Diamant,
DKW,
Garelli,
Goricke,
Hercules,
Horex,
Islo,
KTM,
Mars,
Mazzilli,
Miele,
Messerschmit,
Monviso,
New
Map, Norman,
Penton,
Rokon,
Santamaria,
Sears,
Sparta,
SWM,
Testi.,
Victoria
and
Wassell.
SACHS was the largest manufacturer of two stroke motorcycle engines
in Germany during the fifties, sixties and seventies. These engines were
used by many manufacturers, Hercules and DKW being two of the more prominent.
Portions of the information above courtesy Hartmut
Schouwer
Sachs
at the Wikipedia
Tue Mar 11 2008
ego.h<at>hotmail.com
COMPRA
SACHS MADASS 125
DONDE PUEDO COMPRAR UNA SACHS MADASS 125 EN MEXICO Y CUAL ES EL PRECIO
GRACIAS
MEXICO
Sun Feb 24 2008
kev<at>kev50.wanadoo.co.uk
sachs engine fitted with bing carburetor
sachs 1251/5a
i am having problens with the float level on my bing carburetor model
number 1/24/153 can anyone tell me the settings thank you.
Thu Feb 21 2008
george.w.ryser<at>verizon.com
1958 west german sachs progress 200
progress werk 1958 200 cc 2 stroke
runs perfect need clutch, have parts orig in box, don't have the time.
what is it worth to someone. can send pics if interested.
nj united states
Tue Jan 29 2008
jpjgordon<at>hotmail.com
Sachs MadAss 50
Sachs MadAss 50 Sachs MadAss 50 2007
Hi please could you give me a quote for 10 x Sachs MadAss 50
to be exported to nelson new zealand. many thanks
james gordon
new zealand
Sun Jan 20 2008
vernsgaragellc<at>wi.rr.com
Sachs 340cc radial fin freeair motor
Rokon MX Trail bike
I'm looking for a motor or motor parts. It was made in the early 1970's.
It used a snowmobile type bely type transmission. Thank's for any direction
or leads you might have. Robert
Milwaukee, Wisconsin USA
Fri Jan 11 2008
terrychapman<at>telkomsa.net
SMALL RUNABOUT BIKE
SACHS MADASS
YOUR STOCKISTS IN BR1TAIN PLUS E MAIL ADRESS.PLEASE ADVISE
GREAT BRITAINterry
Mon Jan 07 2008
gash602<at>hotmail.co.uk
250 into a Sachs Roadster frame
2002 Sachs Roadster 125
Does anyone know if it's possible to mount a 250 Virago engine into
the frame of the 125 Sachs Roadster? I was wondering if it was a case of
just dropping one in. If anyone has any thoughts or experience of this
i'd be happy to hear from you.
Kind regards
Cornwall
Fri Nov 30 2007
phillip_cohen<at>bigpond.com
Sachs bicycle engine
Do Sachs make a bicycle engine that could be fitted to a mountain bike?
Australia
Fri Nov 02 2007
RAYTOSTADO<at>MSN.COM
SACHS MANUAL
125 CC SUNBURST HEAD, TRAILMASTER?
I NEED MANUAL COVERING INSTALLATION, TIMING OF FLYWHEEL MAGNETO AND
SYSTEM.
OR, LOCAL SO CAL SERVICE SHOP
SOCAL, USA
Sat Sep 29 2007
broylesmike<at>yahoo.com
sachs 125
i have sachs 125 i think is a 1970 the # on the steeringhead is 417001090
.the motor is not the radial head but the square one with rectangler exhaust
port.thank you for any info or pics
coos bay oregon usa
Sun Sep 23 2007
marujoalmadena<at>yahoo.co.uk
sachs
sachs sis
Hello , I am looking for a petrol tank and a seat for a sachs sis 50cc
26 years old, please can you help
Portugal
Sun Sep 23 2007
pcirolia<at>atmc.net
sachs motor driven cycle
1980 sachs hercules werke gmbh
hello, i own a 1980 sachs motor driven cycle. anyway
i can get a manual or info on this thing. anyone know what its worth
? it was manufactured by nurnberger. thanks, pat
north carolina
Try Valuations.
and Books and Manuals - Resources
Tue Sep 11 2007
REBEL<at>TOLEDOTEL.COM
tires
MARCH 1980 SACHS GRUPPE
LOOKING FOR TIRES FOR MY VINTAGE MOTORCYCLE THEY ARE 17" X 2" WIDE
DO YOU KNOW WHERE THEY CAN BE PURCHASED. WOULD APPRECIATE YOUR HELP. IT
IS WEST GERMANY MADE
TOLEDO, WASHINGTON
There is a selection of tyre resources here:
Vintage Motorcycle Tyres
Wed Aug 29 2007
abftempleton<at>btinternet.com
import to uk ?
Sachs Saxonette Luxus 30cc
1. can i import this motorised bicycle into the uk? 2.or can i obtain
one in europe and export it to uk?if so where in Holland or Germany and
what would be the cost be in pounds?
Scotland
Thu Aug 23 2007
lau_2oo6<at>msn.com
parts
sachs xtc 125 4 stroke 2004
hi i am looking for a workshop manual with a wiring diagram for the
bike and a price if you can get one please
UK GLASGOW
Try under Books
and Manuals - Resources
Fri Aug 17 2007
abftempleton<at>hotmail.co.uk [bounced]
uk dealers ?
Sacks Saxonette Luxus
Are there any dealers in the uk ? if not where can i purchase a 2nd
hand saxonette in Holland or Germany ?
Scotland
Sat Aug 11 2007
tonydavidc<at>msn.com
Instruction Book
sachs 49er
I have purchased a Sachs 49er in England but they could only give me
an instruction book in German. Can I get one in English any where/
Bristol
Tue Jul 17 2007
vanderheydenj<at>porchlight.ca
Maintenance Manual
Saxonette #519505 sachs 301a
Looking for a detailed Maintenance Manual for the Saxonette I recently
purchased, Thanks.
John VanderHeyden,
Toronto/Courtice
Try under Books
and Manuals - Resources
Wed Jul 11 2007
mariocarrapeta<at>hotmil.com
Hello,
I want to know where i search the original mirrors for the sachs achilles
ami?
If have answer,please send me a e-mail.
Tank you
setubal
Fri Jun 22 2007
r12nuts<at>hotmail.com
wireing diagram
sachs xtc 125 4 stroke
where can i get a wireing diagram for my bike?
london
Try under Books
and Manuals - Resources
Wed Jun 20 2007
www.dysty294<at>yahoo.com
tring to find out want this bike is
?
i have a flat track bike engine numbers are fichtel&sachs ag schweinfurt
7777731 sachs sa 340 r
the frame has csrb 36 the b is stamped backward any info would be great
fort worth tx usa
Fri Jun 08 2007
djmcelroy<at>msn.com
headlight/speedo
'69 sach 80 cc boondocker
I need headlight/speedo and other misc parts for a 80cc sachs boondocker
Crested Butte CO
Sun May 27 2007
hen.chip_wilhelm<at>yahoo.com
SACHS MOPED
BALBOA (M-4) sachs 505/1
where can i have it repaired? i live in south new jersey.
Fri Jun 01 2007
pbeatrice<at>comcast.net
Ignition points
Sachs 1251/5A
Can anyone tell me the Bosch part numbers for the points and condenser
used in a 122cc Sachs motor as found in an early Penton?
Bellingham,MA
Sun Apr 29 2007
nickydom76<at>hotmail.com
motorised bike
sachs 301/A
I own a sachs 301/a on a 26" raliegh frame just wondering if there
was somewhere i could take it in brisbane australia to get more out of
the top end and more tourqe
Brisbane Australia
...........
Here is a photo of the sachs 301/a on the raleigh frame.
PS still would like to know how to get more out of the top end and
more torque!!!
Thu Apr 12 2007
jnjack<at>aol.com
Wiring Diagram
Sach 505 / 1A
Where can I purchase or locate a wiring diagram for this moped? Thanks.
Jack
New Haven, CT
Try under Books
and Manuals - Resources
Wed Apr 11 2007
cnj92<at>citlink.net
magneto on tyran
tyran 125 mx
how can i find parts for my tyran.it has a 125 sachs motor.It seams
that the magneto is not working?
USA
Thu Jan 18 2007
c10112
uibk.ac.at
6speed gearbox
Sachs 50SW or Sachs 50SWD
Hi,
I am searching a 6speed gearbox of Sachs, called either Sachs 50 SW
or Sachs 50 SWD, in any condition.
Please contact me at c10112 ÄT uibk.ac.at
Innsbruck, Austria
........
Thank you for your help. I attach a pic of the bike to this email.
More pics can
be seen on http://wolfgang-l.magix.net
Fri Jan 12 2007
ken.rimellbtopenworld
Sachs engines
SA290
Sachs engine SA290 No 5667174 HUBr 297 69 CM3 from about 1970. Any
ideas on how to get at the points and possible point gap please
West Sussex
Fri Dec 29 2006
creativecatzslingshot.co.nz
Oil Seals needed for 50cc sachs motor
Crescent Moped with sachs motor # 2674205
I have a 50cc Crescent moped and require engine seals for it. I have
attached photos & dimensions to assist you. There are no other numbers
on the motor other than what I gave above - 2674205. I have been trying
for a long time to source a supply of parts for this bike and hope you
will be able to help . I date the bike to be about early 1960's.
New Zealand
Mon Dec 25 2006
roberteubankscomcast.net
wanted
eagle 3
wanted
nj
Fri Dec 22 2006
sofia_juliocostayahoo.com.br
pedido informação
sis sachs felino
Procuro informação sobre o modelo mencionado penso que
foi produzida entre 1954/59 existe um modelo parecido chamado sis sachs
dover
Santarem Portugal
Wed Dec 20 2006
paul_silvester1968hotmail
Sachs 301 Moped Engine Manual
Please help. I have a Sachs 301 engine but need the engine manual
to figure out how to get it going. If you have any information at
all, please email me Thanks so much.
Canada
Mon Dec 18 2006
lilleySANDHaol
Sachs Engine Cylinder Head
125 engine type D
Looking for replacement cylinder head as mine is cracked.Appreciate
a reply if you have one.
Midlands,England.
Fri Nov 17 2006
gujvariarcom.com.au
Service in Australia
2006 SACHS ROADSTER
Hello,
I am thinking about buying a 2006 SACHS ROADSTER bike, however I am
in Adelaide, South Australia, and don’t know any service where I can do
the regular maintenance and servicing of this motorcycle.
Is there any SACHS service or dealer in this part of the world?
Regards
Gabor
Adelaide
Sat Nov 04 2006
swankleinmac
establish sale price of bike
1969/70 sach 100 cc on/off road bick
Please direct me to who could help me figure out the value of this
bike. - Thanks
Pennsylvania - USA
Try this page
for valuations. Ed.
Sat Nov 04 2006
david.jameslntlworld
sachs xtc125
can any one help ?
i ahave a 2002 4 stroke xtc 125 starts and ticks over but when riden
more than 50 metres it will cut out also light is really dim and gets brighter
when you rev engine .any ideas would be greatly appreciated.many thanks
dave
london
Sat Oct 07 2006
mizzy200hotmail
sach 125cc supersport
hello i have looked all over for a new or second hand speedo clock
for my bike at a reasonable price please help
herefordshire
Wed Sep 20 2006
auctionsrusoutdrs.net
Sachs Motorcycles
Madd ass
I am trying to find someone that can inport me 2 madd ass 125cc motorcycles
into the U.S.A. for me. Please feel free to take my contact info. and help
me if you can? e-mail
auctionsrusoutdrs.net
or auctions1hotmail
My name is Everett Gribbins and my phone number is 502-262-3999 Thank you
for any help on this matter.
Indiana U.S.A.
Wed Sep 13 2006
Gelliscantonaol
Sachs motorcycle parts
Sachs Sundowner 50
Need a recoil pull start for a Sachs Sundowner 50/ma. Some of the #s
I have are 6558762 HUB-R 47 EMA 70
Illinois USA
Tue Sep 12 2006
angelaoconnor100hotmail
301/A Engine
Sachs 301/A
Could anyone please help, I need a pull start recoil mechanism for
Sachs 301/A. Thanks Tamworth Staffordshire
Fri Sep 08 2006
csslukonline.co.uk
Wiring Diagram
Sachs XTC 125 4 stroke
I need a wiring diagram for my sachs xtc 125cc four stroke, the wiring
is in pretty poor condition for a 3.5 year old bike. It has the suzuki
125 cc engine and I think there is a problem on the charging circuit as
the battery runs flat and the lights get brighter as you rev the engine.
I tried an aftermarket regulator but when I fitted it it got very hot and
started to heat up the wiring from the generator/engine.Any help, information
on fixing the problem or where to get a wiring diagram from would be most
appreciated. I have contacted several sachs dealers but they seam to be
uninterested either can't or won't help. Thanks, Rich
Wakefield, UK
Sun Aug 06 2006
rdolanwaitrose
BING Carburettor/ Petrol tank
Sachs saxonette 301/A
Need to rebuild carb require detail drawing for reassembly.
Need to replace petrol tank complete Serial Number REHAU AG+Co 0118502
TU1 73 60993
Derby England
Thu Jul 06 2006
buckbear12aol
parts and service
sachs 50/ma abe x aust b
model 6643790
looking for engine parts and service for a old coleman mini bike with
the sachs engine the only other thing i can find on the engine is hubr=47
71
fichtel sachs ag schweinfurt
wisconsin u.s.a.
Thu Jul 06 2006
kj004g3718blueyonder.co.uk
sachs 125 roadster
Hello, does anyone have an address where I can get an owners repair
manual for the sachs roadster 125?
wolverhampton
I have a couple of images of the sachs roadster, have included them
in this email
Regards
Steve
Mon Jul 03 2006
michaelpomerinkehotmail
Moped ?
Manual and or parts rebuild book
Eagle III
Hi just picked this 1982 moped up looking to rebuild it.can you help
thanks
sach 505/1a
40 km #2BOCAO4A5
Eagle III [honda] - Fichtel & Sachs ag schweinfurt 40km
CA000063
USA , MT,59401
.......
Thu Jul 06 2006
1982 Eagle III [ hercules]
found more info -bombardier-hercules-40km I'm still looking for more
rebuild info-like wirering diagrams- parts list any info would help thanks
Thu Jun 29 2006
drothmts.net
dealership
Dear Sirs, I can't seem to be able to get contact information for SACHS
Germany to discuss a possibility of establishing a dealership in Canada.
could you please help in this endaevour.
Thank you,
Dennis Roth
Winnipeg, CANADA
Try the Sachs
Directory at Bikelinks. Ed.
Sat Jun 17 2006
de.litchfieldhotmail.co.uk
eletric start
sachs xtc super sports
the bike will start up fine then you turn it off and then you not get
it to turn over i think its eletrical but not postive can any one tell
me why ? thanks
swansea wales
Could you try to explain the problem a little
more clearly? Do you mean that once the bike is warmed up, it will not
restart after it's turned off? Ed.
Thu Jun 15 2006
jctallamyahoo
Spare parts
Sachs 125/74 cc 124
magneto-monoplat electonicu mini 6
No 474350
Starter-electronico (motorplat)
Motorplat electronico secondary coil (19) conversor.
All made in Spain
Kenya
Wed May 03 2006
BEGDOGBELLSOUTH.NET
PARTS INFO
SUNDOWNER MINIBIKE
LOOKING FOR PARTS AND ANY INFO ON THIS MINIBIKE
NASHVILLE TN
Tue May 09 2006
model 6771923 fichtel -sachs eng (sundowner}
sending more info about this bike looking for a pull start,and info
about year, type of spark plug, what kind of oil is needed in it.this is
a new engine and has never been statrted. sorry no pictures
nashville
Mon Apr 24 2006
wildbill72368aol
bearing
i am looking for a sachs bearing part # 8000-89089 can you help
us
Wed Mar 29 2006
fredrickmschindleryahoo
Sachs 100cc engines in JBK, Horex
Horex rebel 1959, JBK 1959
I can find no mention of Sachs powered J.B.K. motorcycles. I had a
1959 Horex rebel 100CC which was similar to JBK. Both motorcycles were
sold in the US in the late 50's and early 60's. The JBK was upgraded to
125cc Sachs engine with footshift replacing hand grip shift in early 60's.
Was the Horex manufactured at Bad Homburg or manufactured for them by Hercules?
dayton Ohio
Tue Mar 28 2006
sls14meadwestvaco
Looking for a Sachs 100 MX Advent
100 MX Advent
I am looking for a MX 100 Advent. I am located in Virginia.
If you have one or know of one that is for sale please contact me via e-mail
sls14meadwestvaco.
Thanks,
Virginia
Wed Mar 15 2006
michaelmwebster62.fsnet.co.uk
speedo reading
do all sachs bikes speedometers read in kph .and does that affect the
u.k . mot test?
manchester,england
Fri Mar 10 2006
djmcelroymsn
Sachs 80cc Boondocker enduro
I am looking for a whole or parts bike on a '69 80cc Sachs boondocker
Colorado
Wed Mar 08 2006
brnrdfoxnetscape.net
Choke Cable Wanted
I need a choke cable for a 2003 Sachs V2 125 Roadster in the UK. We've
got a 4 week wait from the dealer Can anyone especially in Germany help
us get one a bit quicker?
Leicester UK
Wed Feb 15 2006
tomwjinteria.pl
Sachs Achilles
I seek the information on Sachs Achilles.
Poland
Fri Jan 27 2006
expservheromotors
required sachs 125 cyclinder kit
I am in New Delhi - India
I required cyclinder kit for sachs motorcycle of 125cc. Kindly let
me have the adress of any dubai based or german based dealer.
Try this page for a German dealer:
http://www.sachs-bikes.de/en/haendlersuche.php
Can't help with a Dubai dealer, sorry.
Wed Dec 21 2005
jakarobaol
1938 german sach 125cc motor bike
I have a 1938 sach motor bike. would like to know if it has any value,
and if there are available parts? Bike is in good condition,but needs a
carburater, manafold, and a kick stand.I would like to restore to
it's original color etc. Any available information would be appreiciated.Thamk
you
Mon Dec 05 2005
bifichefree.fr
motor sachs 250 7 vitesses
bonjour avez vous de disponible des pièces détachées
pour moteur sachs 250 7 vitesses, monté sur une moto gauthier
Robotrans: hello have you of available one of
the spare parts for motor sachs 250 7 speeds, climbed on a bike gauthier
Wed Nov 23 2005
geekaustingmail
MadAss USA?
I know the MadAss is not available in the USA and who knows... It might
NEVER be. BUT I want one. A 125cc. Do you know of any
importers?
Could not find a US importer. Ed.
Wed Nov 02 2005
cam102030sbcglobal.net
Drive chain
Can You tell me what size chain a 1978 Sachs Balboa takes?
Thank You, Mike
Tue Nov 01 2005
everyevery.fr
piston 54.25 for Sachs engine 125/7
Hello, could you help me telling me wher can I find a piston for a
7 speeds 125cc sachs engine. thanks in advance
Sat Oct 15 2005
vintageyamahaadelphia.net
SACHS 100cc MX bike wanted
looking for a late 60's early 70's 100cc SACHS MX or Cross Country
bike in rebuildable condition. I am located in Southern California
Sat Sep 24 2005
phallessyozemail.com.au
Sachs Saxoneete
Any information would help. They were available in Australia some years
ago but seem to have vanished.
......................
I have since located the Australian agent for the Sachs Saxonette and
other
similar machines.
www.moped.com.au
Peter Shalless
Thu Sep 22 2005
fredwslusa
moped engine parts
O own a moped with a sachs engine it says 40km on the cylinder
the motor is on a general moped made in taiwan. it has pedals and a small
bing carb. I would like to know if I can get a larger cylinder/piston/
manifold for the motor I would like to get up to about 80cc if possible
motor is from 1982- please e-mail to me please
Sun Aug 07 2005
jmcelroyfrontier.net
sachs '69 80cc boondocker
I am almost done restoring 80 boondocker. I need headlight/speedo assembly
and end of the muffler piece. any help.Thanks, Dan McElroy
Crested Butte Colorado
Mon Jul 11 2005
alec.wilkesnt.sympatico.ca
sachs engine
I recently had an old rebuild (underconstruction) bike given to me.
It has a sachs engine model# 6774065 122cubic cm installed on an old honda
frame(I think?) Can I get parts for this engine and if so how and where
as I will have to rebuild
Sun Jul 03 2005
laplumes89hotmail.fr
recherche piesce moteur sachs 1974
je rechercher un bas moteur sachs de 1974 a un bon prix je suis dans
l yonne 89 pre de sens
Sat Jul 02 2005
jimmymcjohnhotmail
Sachs XTC 125
does anyone have or know where i can get hold of a set of front forks
for the XTC due to a car pulling across the one infront of me i'm now in
desperate need.
Subject:
Re: 1978 Sachs Balboa Moped parts
From: <infohercules-sachs.com>
Date: Wed, 29 Jun 2005 23:28:53 +0200
To: "Southern Jersey Tom =^..^= Cat" <theyearbookguywebtv.net>
Hello Tom,
yes, a few $, I can request the wholsaler about the fuel tap, the fuel
hose
and the plug wire but the shipping to USA is about 15 $. Should I inquire
the price?
The bike looks like this one http://www.bikepics.com/pictures/073261/
? This
would be a Hercules Prima in Germany.
Best regards
Georg Landmann
--------------------
Ok Tom,
I´will ask my dealer Herbert. In Germany Hercules-Sachs marketed
about
200000 of this mopeds in the 80´s.
But the german cancer of bureaucracy stoped this success. To wear a
helmet
become obligation and you had to take a lot of driving lessons for
this 25 km/h bike.
Now the old scool bikes are back.
Georg
------------------
Hi Georg......
>
> Yes, I'm not adverse to paying the that much shipping for the parts
that
> fit. Not much hope of finding it in the states these days,
those older
> model parts. I did a makeshift hose from a bike pump years
ago which
> fit. It's that outside fuel line hose that goes to the motor,
and the
> wire would be good to change and the valve does leak, seals have
aged I
> suppose. Thanks for your help. I doubt if the local sport
vehicle
> shops have these parts.
>
> Tom
--------------------
You can see it also on my page: http://www.hercules-sachs.com/html/mofa.html
In Germany it´s named "mofa", Motor - Fahrrad means motor cycle,
restricted
to 25 km/h. The engine is the same as yours but the cylinder have smaller
ports and a
smaller caburetor.
Back light is also not expensive, a will ask about it.
--------------------
Yes Georg, that's the one in the photo. Mine is blue.
Neat to see a
> photo of it. My nephew's Dad bought one too for his boys back
then but
> I doubt if they still have it. I don't have the tail light
anymore, but
> I don't think I'm going to street ride it much. Just curious
though
> what that would cost? I live on 23 acres and can ride it around
the
> country block. I have the owners manual somewhere upstairs.
>
> Tom
----------------------
Yes, I also owned one as I was 14 Years old till I was 16. Then I must
have
a "Kleinkraftrad", very bad word, hihi. It is a smal motorbike, 10
HP, 80 km/h and you could take out a gril with it :-))))
Today there is a great revival in mofa - racing. It´s pity for
this old
bikes, but the youth have a lot of fun to make a race and tune this
smal
bikes. You can change a 80ccm cylinder with a big carburetor, less
weight,
it runs up to 100 km/h.
Look this:
http://www.mofarennen-speinshart.de/2004/Rennen2004/Teams2004/Teams.htm
-------------------
Yes, they are very economical and you don´t need a car park.
The bikes were completly made in Bavaria. The engine were made by Fichtel
&
Sachs (Today ZF - Trading) and the bike itself by the Hercules - Werke
Nürnberg. My friend Herbert worked for Sachs and Hercules.
Oh, 1 AM in Dachau, I must sleep.
Good beye!
Georg
---------------
With the price of fuel over there, they are economical and practical
for
> some I suppose. It's a shame everything is so restrictive nowadays.
> Too much regulation.
> The bike has been in a shed and not suprisingly the tires lost the
air
> over the years, but not even dry rotted. They pumped up just
fine!
> Made in Holland they were. I think I have 1300 miles on it?
>
> Thanks for your help Georg!! :)
Sun Jun 26 2005
jmcelroyfrontier.net
late 60's sachs boondocker head light
am looking for a sachs head light for a late 60's sachs boondocker
Tue Jun 21 2005
www.rottenrob209yahoo
info on sachs bike?
if you could tell me some info on this bike for me , brand unknown
it has a sachs motor but not sure on the bike..ser#25427000440 eng#5389817
if you could let me know t/y very much
Sun Jun 12 2005
hrojoshaw.ca
Sachs engines
Are there any Sachs engines still available in the 400cc and 40hp range
for snowmobiles or experimental aircraft? Thanks...Herb...
Sat Jun 11 2005
headlessdanielyahoo
1971 sachs country 125cc
I have a 1971 sachs country 125cc in fair condition and have no means
to rebuild it, I would like to see it go to a good owner who will use it.
please contact me at my e-mail address if you or someone you know would
be interested in purchasing it from me at a VERY reasonable price. Thank
you
----------------
I found the bike at an estate sale in lincoln,CA and had to have it.
I put all the parts i found in the workshop at the estate back onto it,
but was unable to find a headgasket. so i made one out of 0.030" gasket
material, had the cylinder berry honed, cleaned out the fuel injector and
the left side of the crankcase. it ran for about 15 seconds and blew out
the headgasket. I was later told that it requires a copper headgasket and
have been unable to find one. but it did sit behind my house for
about 6 months under a tarp and has some minor surface rust in the cylinder.
the frame is in good shape as well as the gas tank, although one of the
plastic emblems is gone and the other has a crack in it. it looks
to me like it is repairable. but I am by no means a motorcycle repairman
and recently moved so it is impossible for me to keep the bike any more.&nbs!
p; I would like to see it go to someone who will make it run, and take
good care of it. please contact me if you have further questions.
Image in the Hercules
gallery
Wed Jun 01 2005
fswartzelp.rr
1985 real sachs engine
what type gas or fuel mixture does it use
Wed May 18 2005
pagantsnowcrest.net
Fichtel Sachs Motor 6737512
We have a Arctic Prowler (50?) Model #2325-001 motorcycle with a Fichtel
Sachs Motor 6737512, and we needs some parts. Where do we order these parts?
Thank You, Pam Gant
Sun May 15 2005
microcarlothotmail
Sachs 50 cc engine
I am in USA and I need a running Sachs 50cc engine for my Messerschmitt
three wheel truck. Please contact me at microcarlothotmail
Sorry but little truck is taken apart at this time it is called a Mokuli
by Messerschmitt.
Larry Newberry www.microcarlot.com
Thu May 12 2005
warren.apapbigpond
motor parts
Hi, im trying to find a fuel bowl for a SACHS 301/A in Australia. If
you can help me out please contact.
Finally got some pics for you, i hope its enough , if not i will start
copying the hand book. What i am after is the fuel bowl and the plastic
shroud section on top of the motor where the fuel line joins from the tank.
I hope you can help me. Warren.
A source of Sachs parts in Australia: http://www.moped.com.au/
Ed.
Mon May 09 2005
miketwins02yahoo.com
I have a 1970 100/125 cc motorcycle,I need parts
I have a sachs motorcycle 100cc cross country.I need engine parts and
repair books on this bike.the bike runs but the transmission needs fixed.as
always.Thank you Mike Lutz.
Date: Fri, 25 Mar 2005
subject: Fichtel and Sachs
Email: miclark at senet.com.au
message: I have a KM48 rotary motor that is being used as an inboard
motor to power a small boat. Does anyone have any info on this motor or
even better a manual. thanks
Matt
Date: Sun, 20 Mar 2005
From: gigi agip <germanantiq at yahoo>
Sir i dont have an motorcycle, i have an engine from a motorcycle.
The engine is from an SACHS motorcycle from 1930 or 1940 i'm not sure,
and is in perfect condition of working.
If you are intrested i can send you some pictures whith the engine.
And excuse my delaid of the mail
My regards to you
Date: Mon, 28 Mar 2005
Sir the plaque of the engine is wrote Fichtel&Sachs AG Schweinfurt
a.M. Mot.Nr.582806 Hubraum 97/98ccm ,Bohrung 48m/m Hub PS.2,25.
My regards to you
Date: Tue, 15 Mar 2005
subject: Sachs
Email: rebelyell at civilwarantiques.com
message: I have several complete and parts Penton and DKW bikes with
Sachs 100 and 125 engines, complete or for parts!
Image in the Hercules gallery
From: alfred tommy [mailto:alfredtommy@yahoo.co.uk]
Sent: Tuesday, March 15, 2005 8:16 PM
To: rebelyell at civilwarantiques.com
Subject: Hercules 175 GS
AM,I RESPOND TO YOUR ADVERTISED {Hercules 175 GS},I WILL
LIKE TO MAKE ENQUIRIES ABOUT IT REGARDING THE LAST OFFER $750 AND
THE PRESENT CONDITIONS AS I THINK THAT MATTERS MOST,ALSO I WILL BE GLAD
IF THERE IS ANY COPY OF PIUCS TO VIEW.I WILL KINDLY APPRECIATEW YOUR QUICK
RESPONSE OVER THIS AS I WILL WANT TO MAKE THE NEGOTIATION FAST.HOPING TO
READ FROM YOU.
REGARDS,
rebelyell wrote:
Motor was running when put in storage 4-5 years ago; may have pipe but
not sure what it looked like (I had 17 KTM and Pentons at the time, many
parts scattered and similar looking). Have Lectron carb that was
on it; misplaced kicker; has Ceriani front forks and Marzochi (spelling?)
shocksengine never rebuilt, used as a trail rider only. Restored
worth over $2500 but the freight might kill you ! Also have several
OLD ones&see pics.
Hi,
... business associates in USA telling him i've
gotten the Hercules 175 GS i'm searching for and that he should make
my funds { $4000 }available in payment of some fuel equipments
i supplied to him.He assured me he would make the payments (check}
available I will instruct him to get the check across to you (ASAP)
and as soon as you cleares the check you would need to deduct your
amount of ( $750 ) from the total of ( $4000 ) and send the remaining
balance to my reputable shipper via western union money transfer...
The pond-dwellers persist with variations on the Africa
scam
subject: sachs S#511225516 7-1980 50cc
Email: krzszkaol.com
message: I need a wiring Dia.for a sachs moped nurberger hercules werke
GMBH ? 7- 1980 motor driven sachs cycle any help thanks jim
January 4th 2005
subject: sachs magneto
See under Penton
December 29th 2004
Hi, I have a 1971 Penton Motorcycle 125cc w/Sachs engine, and Cerrani
Forks I'am looking for RACES for the Fork head, I found the the ball bearings
but cannot find any new RACES. Do you have any for sale or know who would???
Fred
Date: 29 Dec 2004
Email: rubio5@AOL
December 28th 2004
message: I need a wiring Dia.for a sachs moped...
See Sachs
Forum
October 1, 2002
My name is Scott Sutton from Gladewater texas, I traded one of my race
cars and got a sachs 2 stroke dirtbike on the trade. Everything seems to
be orignal except for the front fender and the air box. the bike runs great
and is in good condition.I cant find out what year it is or what cc it
is.It has a model number on the engine along with more info. I would interested
in selling the bike if you know someone who maybe interested in buying
it. I can be reached at home at 903 845 5813 or 903 720 5417 --
Wenzeljohnson
at aol
December 27, 2001
I have lots of parts for the 125cc Sachs engines, cranks, gears, cases,
cylinders etc. I don't have pistons or rings...
See Sachs
Forum
November 1, 2001
RE: Monarch 1974 125 GS
Do you know anything about these little rockets. I own one and was
thinking that if SACHS continued to build them then the gear box's should
have been up graded.
What was the last year SACHS made the motor and what is it's designation.
Thank you for your time.
Dirk Williams -- DWill75289 at aol
October 22, 2001
I have a 1967 Sachs Boondocker...
See Sachs
Forum
October 2, 2001
Hello everybody I am an owner of Sachs Hercules 125 in Turkey. I can
help about your parts (I think limited) my mechanic has a lot of Sachs
Hercules 1970 125 cc 2 stroke. Contact me. -- yigit beser
-- yigitunavy at hotmail
August 31, 2001
Hi!
There are two private homepages concerning SACHS: www.oldsachsmotor.de
of Tobias Kreutz for the pre-war SACHS-engines and my site www.newsachsmotor.de
for the after second world war engines. Both sites are German, but
self-explaining. They are private without financial interests.
To exchange links, please check each site. Best regards, Horst Hansel
--
horst at hanselweb.de
August 4, 2001
Hello everybody
I found your site today by chance and read our questions about Hercules-Bikes.
It´s a well known brand in Germany. Since approximately 10
Years the Nuernberger-Hercules-Werke didn't no more exist. The Fichtel+Sachs
AG bought the licenses. Not at all try the search-engine: http//www.google.de
Type in: hercules-motorrad, and you will find many further information
etc. I have already my Hercules 50ccm-bike of 1976. Greetings
to all owners in the world, in the hope that I could help you. With
kind regards:Horst -- Horst.Guss at t-online.de
August 3, 2001
Hi, I have a Sachs saxonette mini bike and I am looking for the gas
line primer button assembly piece. If that's what it is called. I
think it is a 50 cc. Do you know who might have the parts for this?
thanks
Jack Corcoran
jaxka at aol
3807 state route 133
Williamsburg Ohio 45176
June 19, 2001
I own an Hercules Sachs 175 seven new of factory...
See Sachs
Forum
June 13, 2001
Hello,
I have just purchased a Hercules moped with a Sachs motor...
See Sachs
Forum
May 6, 2001
I have a 1970 Sachs 125 Cross Country that I purchased new from the
dealer that I used to work for. I do know that during that period that
Sachs was a very popular engine with many manufactures.
There is a guy that I know of who had a shop in Pasadena Calif. named
Eric Jenson who was a factory rider for them and very good.
The 5 speed transmissions were the weakest part of the bike as I remember.
I had many problems with mine.
I am looking for parts to restore my bike if anyone has any outlets
or leads on how I can find them it would be greatly appreciated.
Thanks Steve Wright -- buzword at pcisys.net
April 20, 2001
I am not an expert but I remember seeing many Sachs engine two strokes
in Vietnam in the mid 60s...
See Sachs
Forum
March 20, 2001
I am an owner of a Sachs 125 cc 2 stroke 1970 model. I am an
officer in the Turkish (turkiye) navy. I think I am only in
this country owned it. So sometimes I have troubles about some parts
of it. I love it like u. and I need wires (both side) and useful
gas handle anyone help me.. tx.. -- yigit beser --
yigitunavy
at hotmail
March 16, 2001
I was wondering if you could help me. I have an old Sachs moped and
can find no one around my area to help. My father however is...
See Sachs
Forum
March 3, 2001
Dear Sirs
I wonder if you could help me.?
I have just been given a trials bike but don't know what it is!
The registration no is OOV 2G frame no is 1086 it has a SACHS engine
no 0613-107000. It has twin shock swing arm and telescopic forks with a
21 inch front and 18 inch rear both with conical hubs. It has a fiberglass
tank which has been painted several times and has no markings. I
do hope you can shed some light on this so I can start to rebuild it !
-- Thank You -- Tim Houseman. -- t.j.houseman at tinyworld.co.uk
January 12, 2001
Hi, I am from Australia and we have 2 Sach rotary stationery engines,
rated at about 5hp. We are looking for information, eg: manuals etc..
and possibly parts. If you can help please let us know or let
us know of any agents that can help us, preferably in Australia.
-- Thanks. -- ....... Eric ....... -- Eric.Tasker
at bigpond
January 7, 2001
Re: Sundowner Minibike
Wanted: any information on or pertaining to Fox Co. Janesville WC.
Also, Fichtel & Sachs AG Schweinfurt Saxonette 2 stroke automatic motor.
(American made frame, German made motor?) -- Please contact
me by e-mail at pamelatoddp at aol
January 1, 2001
Hi,
I have a '67 Hercules Fichtel & Sachs 50cc engine I am trying to
rebuild and it is missing several parts, the most important being the kickstart
lever and the air filter. The engine goes to a "Hercules Roller 50"
and is in pretty good shape except for these missing pieces. Where can
I find these parts - does anyone have something that might fit? I am also
missing a Hercules badge-any ideas?
Thanks, -- Craig Barbieri -- Philadelphia
--
cacb at bellatlantic.net
December 7, 2000
I am rebuiding a 1965(?) Cyrus with a SACHS
50/4LKH motor...
November 6, 2000
Cycles and motorcycles
Their address is Nurnberger Hercules - Werke, 8500Nurnberg, Germany
and Sachs Motor is Schriber, Kafertaler Strasse 220a - 222, 6800 Mannheim
1, Germany
JJ Rickard -- jjrick at direct.ca
November 4, 2000
Not sure if a 1974 Tyran qualifies, but it certainly had a Sachs engine.
I have a chassis now and I am looking for parts to begin restoring this
bike. It is a 125 and I have been told that many of the Dalesman
parts fit it. I am especially in need of a seat, tank and pipe, of
course an engine too, but they seem to be plentiful around these pages.
Anyone with any additional information on this bike should contact me at
their earliest convenience. -- Thank you. -- JoeyMotox at
aol
October 29, 2000
I have a Sachs gearbox in which the connecting rod pulled in half.
I couldn't say what year, or make it is, but i am sure it is a two stroke
in around the 125 size. the rod spun around, and ruined the case halves.
but the side covers, magneto, clutch, and transmission are probably in
useful condition. I would get rid of it cheep to someone who could use
it. kirtlisa at gci.net
October 3, 2000
Hello,
I am road racing a modified Penton, Fichtel and Sachs "Six-Day" 125cc
in the 'classic-vintage 250cc' class
See under Penton
September 28, 2000
Hello, I own a KTM with a 80cc Sachs 5speed water-cooled engine. Unfortunately
it have a defective ignition (motoplatt 12v). Because the ignition
is at the right side of the engine, I cannot attach a motoplatt from a
zundapp, because they are mounted on the left side so they turning left
instead of right. You might think this is a joke, but it really doesn't
work. So I am looking for a motoplatt ignition that is made for turning
right, which is marked on the the ignition with a arrow. Thanks
Eric -- e-meijer at helios.nl.uu.net
September 17, 2000
Hi:
I am a collector and restorer of Sachs Enduro M/C's. I am looking
for original new rear shock absorbers for several restoration projects
of Enduro's in the 1969-1972 bracket. Can anyone help? --
Thanks, -- Mel -- G1159 at aol
September 15, 2000
Hi there, I stumbled across your website, and you have lots of interesting
links. I was wandering, I have a 1981 50cc Sachs Moped...
See Sachs
Forum
August 28, 2000
Hi,
I just received a very good sized inventory of new Sachs motor parts
for the 100 and 125cc two stroke motors. Please e-mail me with any needs
you might and I will see what I can do. -- A-VAC Industries
-- savemoney at avac
July 28, 2000
In the early 1970s I owned a 71 Sachs Boondocker and following year
a 72 Sachs/DKW 125 Enduro. I always thought they were a great little
bike, always running w/ the best in their class of the day. My friends
were all riding Pentons, Jawas,Maicos and of course the spectrum of rice
burners. Mention of water around Some of these bikes and they would belly
up but the Sachs and DKW were submarines and could swim with the fish.
The Earls front suspension was superb to any telescopic fork Id ever ridden,
handling was Ace in the sand. The Sachs engine was cursed with and
awful shifting problem. (just when you were pulling away from an opponent
or got the hole shot off the start, the mid shift curse would occur. Your
RPMs would scream through the roof an everyone would blast by you leaving
you in their dust, eating their dirt. Well that was the worst experience
I had with these bikes. I always thought they made a much better
Enduro racer than Motocrosser. All in all these were great bikes
that ran with the best of them in the early 70s and have gone forgotten
for many years. Its good to see people are finding a new interest in them.
-- Ed Hall, Texas, USA -- quonset at airmail.net
Attached are some pictures of my 72 DKW which I own today.
July 12, 2000
Hello,
I have two 1972 MCB trials type motorcycles.Both are identical using
125 Sachs engines. I am missing one engine and need a few parts for the
magneto on the other.This was a great bike to ride-great suspension ,easy
starts and lots of power.I would like to restore them for my sons to ride
and need Info/ parts. If you can help it would be appreciated.The bikes
are Blue with silver frames - chrome fenders.I bought them from a man who
was a dealer in Sumner ,Ia, in the 60's and early 70's.
thank you -- Kelley Martin ksm1200 at hotmail
July 2, 2000
I sell Sachs motorcycles on the isle of man www.bike-bits.co.uk
Sachs now make 3 motorcycles in the new range
01 -- roadstar 125cc that uses the yamaha virago engine
02 -- xtc 125 sports bike that uses the yamaha tzr 125 motor
03 -- roadster 650 that uses a suzuki engine
NOBLEBIKE at aol
July 1, 2000
Dear fiends!
My name is Kiril Petrov and I'm from Macedonia. I'm a owner of
original motorbike SACHS which was made in 1938...
See Sachs
Forum
June 28, 2000
I've noticed that a lot of people in the Sachs page are looking for
information for the Enduro series with Fichtel & Sachs two-stroke engines.
For anyone wanting repair/restoration information, Clymer publishes a maintenance
book. I found it at www.motocom.com/vintage.html , but I'm sure there
are other sources for the same book. -- Bob Calhoun --
robertc
at corprasoft
June 12, 2000
hello
Do you have any information about the Sachs tc50 m ? Ii need
a plan about the electricity. Where can I find another Sachs page
? -- thanks -- florian -- Florian2
at nextra.at
April 23, 2000
Found an odd bike and was trying to identify
it. Motor is stamped Sachs and has large finned head such as a desert racer
might have. Headset has numbers 10750379 and other than that I have no
more info, has nice forks and frame but i don't even know the brand. Any
help would be greatly appreciated. thanks, Richard -- rwigg
at freedom2000net
April 6, 2000
I have 2 Dalesman 125 motocross bikes. They have six speed Sachs motors.
Both have been sitting for a long time and need work. I don't even remember
what is wrong with them! Any help would be appreciated( manuals, tips,etc.)
-- Thanks, Mike -- Manxed2 at aol
March 26, 2000
The Sachs motorcycle is a favorite of mine since I talked my dad into
buying me one back in 1970. I’ve enclosed a photo of my 1969 Sachs 125
Enduro model, taken in front of my parent’s house on July 4th, 1971 in
Long Beach, California. The photo shows that I stripped off all the lights
(it was street-legal). Also featured on the bike is a custom exhaust by
legendary cycle exhaust builder, Tom Turner. I cut-up the side case, exposing
the chain sprocket. The safety gear in the photo includes the football
pads on the knees.
Today, I still own two of these odd-looking dirt bikes, including a
mint 1969 Sachs 125 cc Cross Country, and a well-preserved 1970 DKW 125
cc motocrosser model. Feel free to write if you have any questions. Dan
Stiel -- dan at stieldirect
|
| Sachs Hercules Dan Stiel 1971 |
Image in the Hercules
gallery
March 12, 2000
I have a Sachs engine but i know nothing about it. I need some
information could you help me. I know it is two stroke, but i don't
know the oil gas mixture. I also would like to find a Sachs engine
book or website. Please help me if you can.
Seth -- UnMeRd1 at aol
March 9, 2000
I have been looking for a site like this for 5 years.!!
My name is Nikos Sfakianos.I own a k50...
See Sachs
Forum
December 27, 2000
Hi, I'm looking for any info regarding 125 m/x's (repair manuals) any
info would be appreciated -- Dirty Dave --
drtydave
at gte.net
December 5, 2000
I am searching for ANY source of parts, or information, for a 1965(?)
50cc CYRUS motorbikese ...
Listed under Cyrus
November 13, 2000
Sachs 47cc engine HELP
Help !! I have 2 arctic cat mini cycle's with the saxonette 47cc engine
and automatic transmission. On both bikes the rewind is missing. I have
had no luck finding anything used or new. I am hoping some one can
help locate a source of a new -used- or aftermarket rewind .any help would
be greatly appreciated. Thanks Brian -- bs4u at pro-ns.net
November 11, 1999
69 Sachs 125 Enduro
It has less than 700 original miles, original tires, original books
and manuals, spare partsetc. Wondering how to find out what it is worth.
Anything you can tell me about its value? -- Thanks. --
Lou Mudd -- images at fascination
November 1, 1999
I have a 125 cc bike and i'm searching for an electric diagram for
it. It's a Sachs engine, from the Dutch army, any other plans can help
me als. ---Thanks---
De_smalle at yahoo
Here is a link that will be useful for Hercules and Sachs fans:
http://members.aol.com/_ht_a/herculesig/hercules_e.html
It's the website of a Hercules club (english language)
Hartmut Schouwer -- Schouwer at t-online.de
September 28, 1999
I owned a 125cc sachs in the early 60's that had the Earles trailing
link front suspension. It was a great bike at the time that I used for
Enduro's. Great ground clearance and suspension travel. I am trying
to find some pictures. -- Ken Murphy -- ken_murphy
at am.exch.hp
December 2, 1999
.......
The only other company in Mexico that made bikes was Islo, and they
started with the Sachs engines 50cc, 100cc, 175cc and 250cc. and later
made the whole bikes.
This company is gone too.
Thank you -- Francisco A. Rosete
Information needed for Sachs Gruppe An 89 scooter built in west Germany
by...
See Sachs
Forum
I had a bike called a Dalesman back in the early 70's, it was an Enduro.
It had a 125 Sachs engine....
See under Dalesman
Sachs Germany
If you have a query about Sachs motorcycles, or wish to share your knowledge
of these classic German machines, please contact
us!
More eBay Sites by Country
Search Wikipedia:
