Brown Brothers Motorcycles

Today in Motorcycle History

Vindec Motorcycles

Made by Brown from 1914 to 1929 [1], the motorcycles included two-stroke lightweights and 250cc & 500cc JAP powered machines.

Olympia Show 1920

Vindec. (Stand 191.)

  • 2½ h.p.; 64x70 mm. (226 c.c.); single-cylinder two-stroke; hand pump lubrication; chain-driven magneto; two-speed dog clutch gear; chain and belt drive; 26x2¼ in. tyres.

Brown Bros., Ltd., Great Eastern Street, London, S.E.

A thoroughly practical little mount with very pleasing outlines, the Vindec lightweight is the only 1921 model bearing this historic name. The detail finish is very good, and plated parts have been reduced to a minimum. The engine is of the conventional three-port type, but the gear box differs from general practice by reason of the fact that no spur gear wheels are used. A chain from each side of the engine drives sprockets on a shaft, and either may be dogged to the member upon which is carried the pulley for the final drive.

Olympia Show. The Motor Cycle, December 2nd, 1920. Page 733


Vindec-1920-212hp-TMC.jpg
2½ h.p. Vindec 1920

Messrs. Brown Bros, have given careful thought to the problems of lightweight design in their 2½ h.p. Vindec. The clean lines of the power unit and the detail finish are very commendable.

Vindec-1920-Oilpump-TMC.jpg
Vindec 1920 Oil Pump

Equal distribution of oil by the pump system is the aim of the three oil leads in the lubrication of the Vindec. (Inset) The drain pipe at the main oil tap.

THE 1921 VINDEC.

THE 2½ h.p. two-stroke Vindec is a distinctly attractive little mount, and is the only motor bicycle which Messrs. Brown Brothers, Ltd., Great Eastern Street, London, E.C.2, will be exhibiting this year at the Olympia Show.

The power unit is a two-stroke engine specially designed for this machine, and has a bore and stroke of 64x70 mm. (226 c.c.). The lubrication is by hand pump, but the oil is equally distributed to the engine, passing simultaneously to three pipes, two of which lead to each main bearing, while the centre one leads to the induction pipe. The oil pipe is also provided with a three-way cock, so that it is easy to fill an oil-can from the main supply.

One of the best features of the machine is the neat method employed in shielding the gear box, magneto chain, and countershaft chain. The machine is finished all black except the handle-bars, while 2iin. tyres form part of the equipment. Fitted with footboards, a Lycett saddle, and Druid forks, it is a thoroughly practical little lightweight.

The Motor Cycle November 4th, 1920. Page 525

Notes
1. In 1909 the Vindec Motor Cycle Co. of London changed their name to V. S. Cycle and Motor Co. to avoid confusion with the Vindec name used by Brown Brothers. However, it is not clear whether Brown were manufacturing motorcycles of that name at the time, or bicycles.
2. Wikipedia states that W. H. 'Billy' Wells finished 2nd in the 1907 IOM TT on a Vindec. This was actually a Vindec Special, sold by South British Trading Co. The company was run by William Huntingdon Wells.




12-Aug-21
villamot at telefonica.net
THE VINDEC 1924
Hola , Me gustaria recibir informacion sobre Vintec
Adjunto fotos por si me pueden ayudar en cuanto al modelo
Muchas gracias
Jose
VILLAFRANCA DEL BIERZO (LEON ESPAÑA

Image posted to Comments

Fri Feb 03 2012
michaeljstone8573<at>yahoo.com
Vindec
Vindec All
Reference Vindec, I am researching the Motoring industry of Cambridgeshire and found that WQR Heighton built the Vindec around 1900s, has anyone out there got anymore info on the company or photos and besides the harley connection and Pell and Parker It would be much appreciated and of course acknowlegements given.

Mick Stone

  • This is most likely Vinco by W.R. Heighton of Elton. Ed.

Tue Nov 11 2008
david.a.ellis at btinternetdot com
Vindec 1926 300cc J.A.P.
I have such a bike. It was restored some years ago to 'concors' condition. However, I have never been able to find any details regarding the 'tank' badge or any others. If a 'transfer' exists this would be fantastic news.
West Midlands UK

Suggest browsing the sites listed here:
Parts/Badges_Decals/


If you have a query or information about Vindec motorcycles please contact us