A Spanish company based in Barcelona that operated from 1983
until 1989 and which was started by three men who left Derbi motorcycles.
Mecatecno models include Mecatecno Chic 50, Kid 50, Alevin 80cc, Mecatecno
Cuc 49, Dragon Fly 50 cc, Mecatecno Meteor, Brindis 50, Mini Kid Cross,
Racing CR-7 & CR-8, and the Mini Pussy.
There was also a very pretty trials model, the 326cc Skywalker.
Luis Gallach won the first round of the 1987 World Trials Championship
on a Mecatecno in Merthyr Tydfil, Wales.
Several Mecatecno models use Motori Morini
engines.
Sun Oct 12 2008
g-williams8
sky.com
Spares and age
Mecatecno Skywalker 326
I have a Mecatecno 326 and was told when buying that it was a 1996.
Is this possible seing as they only made them until 1989 ?
Does anyone know where i can get a new crank shaft ? Snapped the last
one. And i could do with some other parts too. I used to have a supplier
in South Wales, i think it was Peter Church but i can not remember exactly
where. I know the company was the owners name, but no more than that.
Holyhead, Anglesey
Tue Jan 22 2008
karmartesco.net
clutches
mecatecno amigo
i have a 80cc mecatecno amigo 1994 with motori franco morini engine(
i think ), i need a new clutch, can anyone tell me where i can get one
or if some other make will fit.
devon england
Tue Jan 08 2008
ponsrobertfree.fr
Morini franco engine parts
Searching Mecatecno Alevin 80
I'm searching for the following engine parts for a Mecatecno Alevin
80 (89) : Crankshaft or complete conrod, complete piston 47 mm. Thank's
for your help
France
Mon Feb 12 2007
jbill
rbuesd.tehama.k12.ca.us
mecatecno amigo
I have one of these bikes and would love any info on parts. or sites
with more info. thanks U.S. TRIALS IS ALIVE
U.S.A.
Tue Feb 06 2007
jenko3btinternet
AMGO 80cc / ALEVIN
Hi, we are after some parts for the above bike, mud guards & plastic
fuel tank, we live in Hertfordshire, England and any assistance would be
a great help. best Regards
Andy Jenkins.
Nr London, England
..............
The bike is made in Spain and is aprox 6 yr's old, or so I was told
when buying it.
It has a Moto Marine 80cc air cooled 4 speed engine, disc breaks front
and rear and 19inch wheels, not alot more I can tel you .
Any info on part suppliers or other places to look would be a great
help.
I have attached a pic which is not to good as I can,t move the bike
as the front wheel is at the moment being rebuilt.
Many thanks
Andy.
The engine is a Franco Motori Morini, and the model is probably an Amigo.
Try the Motori Morini page for more information.
Sun Mar 12 2006
jamesdanielbrownyahoo.co.uk
Mecatecno Skywalker
1989 MECATECNO SKYWALKER 326cc
A Spanish (Barcelona) company that ran from 1983 untill 1989 and which
was started by 3 men that left Derbi motorcycles.
The Engine is entirely their own specific design with Magnesium casings
and a Nikasil bore.
Approx 200 Skywalkers were made and was Mecatecno's last model.
The bikes were over engineered and to expensive to produce , hence
their demise.
Mecatecno's were most famously ridden by Louis Gallach in the late 80's
Imported to the UK by Steve Dewitt.
England
Tue Jan 17 2006
willo62auyahoo.com.au
Mecatechno Alevin 80
Hello,
I have a Mecatechno Alevin 80 that I am restoring for my son. Can you
please tell me if you carry parts for these and if so then what do you
keep? I may need to rebuild the bottom end of the motor, so are the parts
available such as the con rod, big end bearing ets, gasket kits, etc. I
would appreciate a parts list if you have one.
Thanks and Regards
Grant Wilson
Australia
Fri Dec 30 2005
jamesdanielbrownyahoo.co.uk
Mecatecno 326
Does anyone have any spares for Mecatecno dragonfly or Skywalker .
They are both 326cc engines
Sun Nov 27 2005
stevepistonbroke.uk
92 mecatechno 325
we have an enquiry about a mecatechno 325, have you any clue to the
U.K. importer ?
December 9, 2001
I have just got a Mecatecno cr8,, with a Morini Franco Motori 50cc
water cooled engine, have you any info -- adam...........
Adam Rowland-Hall -- sparky41 at blueyonder.co.uk
October 19, 2000
Teneis piezas para la moto de 49 cc infantil Mecatecno. --
Un Saludo: -- Paco Burgos -- pburgos at arrakis.es
Sheldon's attempt at translation:
I am in need of parts for my small 49cc Mecatecno. Thanks
-- Paco Burgos -- pburgos at arrakis.es
June 22, 2000
Mecatecno
They started with children's bikes, and then moved onto full-size mopeds,
and even a trials bike with which Lluis Gallach even won a world championship
round. -- Juan Carlos Castillo -- jccastillo
at cfu.net
If you have a query about Mecatecno motorcycles, or wish to share your
knowledge of these diminutive Spanish machines, please contact
us!
Search Wikipedia:
