Hi,
I made the D-Csepel logo.
When the Csepel Company is stopped, The Danuvia Company made the Csepel
motobikes. Before it, the Danuvia was a small arms factory. When the Csepel
bikes wasn't enough modern, the danuvia company mede them motobike. It's
name was simply Danuvia. It's based on the Csepel bikes. There wasn't too
big different.
Bye,
Andrew
Wed Oct 07 2009
adityasharma_ak
yahoo.co.in
csepel balkan 250
1946 csepel balkan 250
i recently purchased a csepel balkan 250cc bike, is any one having
any information about this bike then pls contact me
See actually I am planning to purchase that bike but the problem is
I knew very little about
this company and model.
I never heard of it so I wanted to know if it is worth purchasing.
It is in bad condition so if I can get any information about it like
parts and manual, I will purchase it. And also about its value in the market,
its not that I would sell it but just to have an idea of its worth.
Soon I will get its pictures and will also upload them.
Regards
Aditya Sharma
India
As the bike has been out of production for a
very long time, it will be hard to source both parts and a manual. Ed.
Mon Feb 09 2009
nicobakker
hotmail.com
Question about Csepel 125/D
Danuvia / Csepel 125
Hello i am Nico Bakker from the Netherlands and i want to buy a D-Csepel.
To get a Dutch license plate i need to proof whats the year of production
of the bike. Can you tell me how i can find this out?
the framenumber ends with KV4909
The Netherlands
..........
I found the following numbers on the Csepel:
By the steer on the frame: 1 1 0 3 6 K V 4 9 0 9
On front of the engine (under the cilinder) stays in both enginehalfs:
2 5 7 0 0 1
On the left side in the engine, just under the cilinder: 5 1 1 0 1
2 6
Do you have documentation, so i can proof the year of production here
in Holland, or else maybe they say that i replaced the engine so the year
of production of the bike can be different...
Thanks for your help!
Greetings, Nico
Sun Jan 21 2007
scoot
nbnet.nb.ca
1956 Csepel 125 cc
Does anyone have any information on a 1956 Csepel 125cc. I am restoring
this bike and would appreciate any information that you might have.
Fredericton Canada
Oct 2006
subject: magazin wanted
Email: apa.emilfreemail.hu
message: Hi there,
I am looking for the Motor Cycling Magzine, issue July 3, 1963 (or
so). It shoud contain an article on a 250ccm Csepel Pannonia (Hungary)
Pleae let me know, if you happen to have that issue, with that article.
Thank you
Wed Oct 25 2006
send_me_a_mailgmx.net
Csepel 125cc
Hey,
My name is martin and i restore a 1958 Csepel 125cc motorcycle and
am searching for type papers. I only need a copy not the original. It will
help me a lot to get the bike run again.
Thanks
And little Diego will like it too.
Austria, Salzburg
[An image of young Diego perched on the tank was sent. Ed. ]
Tue Oct 17 2006
wileynashaol
Balkan 250
Any info on Balkan Motorcycles? I've been tolf they were brought here
and re-branded as "White's" but they don't seem to be entirely simmilar.
Any info you might have would be greatly appreciated!
I'm including a pic of my Balkan
Milwaukee USA
Tue Oct 10 2006
patluxwkgmail
Csepel bike
Hi, I inherited a Csepel bike my father bought from a farmer in Hungary
in the 1990s. It's really old and was just sitting in a barn. No papers,
but I could take a couple of pictures of it. Any ideas of how to sell it?
We're in Toulouse, France.
Mon Jul 31 2006
scootnbnet.nb.ca
Parts needed
1956 CSEPEL 125
I have just purcheased a 1956 CSEPEL 125. Does anyone know where I
might get technical information and where parts might be obtained
Fri Dec 30 2005
johnm5whotmail
Csepel 1958 125cc
Hello,
I am planning on restoring a 1958 Csepel 125cc motorcycle and am searching
for any literature written in english detailing specifications, restoration,
history, etc. Thank you for your time and effort.
John
Tue May 10 2005
pbucknexicom.net
Csepel Motorcycle
I have a 1968 White 250 SS (USA Badge). I believe it to be a
Pannonia T9-A, built at the Csepel Motor works in Hungary. I need
a few "finishing" parts. Any leads?
Fri May 13 2005
pbucknexicom.net
A Great Looking White 250 SS
I have read an article with great pictures of a gentlman in British
Columbia Canada, Mr. A. Gyarmati who has refurbished his bike to be an
everyday rider. If he happens into this site I would very much like
to talk to him about his restoration. his bike is the "mate" to mine.
Sun, 13 Feb 2005
subject: Hello
Email: claci2003 at yahoo
message: Egy Panonia 1960 as kiadasu motorbiciklit mennyiert kaphato
EURO arosszegben.Varom valaszukat!Koszonom.
How's your Hungarian? Care to
have a shot at translating this? Ed.
the hungarians letter says...
i own a model 1960 and would like to know how mutch i culd sell
it for in euros waiting for yuor answer thanks.
roughly translated by johnny from denmark
Csepel made motorcycles in Hungary from 1951-1975. They were sold under
many brand names, including Danuvia, Tunde, Panni, & Pannonia (from
a bulletin board entry at the Canadian Vintage
Motorcycle Group CMVG)
Very informative site on Csepel Pannonia motorcycles at http://www.celtia.hu/pannonia/
MIG Registeret
has the following on Csepel:
Csepelek, Pannoniak (£10.00): A Hungarian text book from the
publisher of Veteran Auto es Motor, a monthly Hungarian Old Timer magazine.
The 66 pages features the Csepel and Pannonia motorcycles produced from
the 1930s through to the 1970s. Superbly illustrated throughout with 31
colour photographs, plus 78 in black and white.
If you have a query about Csepel motorcycles, or wish to share some pearl
of wisdom about these Hungarian machines, please
contact
us!
