Benelli Archive - Messages pre 2006
Sat Dec 17 2005
sgeraets
dsginc.biz
Benelli 250cc 1972 parts
I need parts for a benelli 1972 250cc
Wed Nov 23 2005
toosussedtoolc3fsmail.net
benelli bobo mini bike
benelli bobo for sale running, headlight missing ,maroon with silver
tank ,original colours .. sensibl e offers ....please call nik 07971 671
943
Mon Oct 31 2005
r_thomas953hotmail
Benelli Sprite
Does anyone in the US have any 65/66 200 sprite parts they would like
to sell please contact me. I need side covers and engine parts ie oversize
piston and rings or stock piston and cylinder. will buy complete engine
if you have one. Thanks
English
r_thomas953@notmail.com didn't send a file.
204.62.206.252
Thu Oct 20 2005
mkenowenbellsouth.net
750sei parts
Anyone with a wiring diagram and voltage regulator for a 1972 750sei?
901-877-6853
Fri Sep 16 2005
playboyjeepsbcglobal.net
benelli dynamo trail
I need parts if anyone could put me in the right direction . please
and thank you.
Here are the images of the bike i also would like to know if i could
get a round about year when this was made and official name . thanks Mark.
Thu Sep 15 2005
racer1dmbroadband
1973 benelli 250 super sport
I have a bike with about 250 original miles on it.Is it worth any decent
money? Also is this a rare bike? I can't find much of any info on it. Any
help would be appreciated.
Thanks,Joel
Sat Sep 10 2005
benelli-restorationcomcast.net
Benelli for Sale 2-750 sei and 1-650-S
I'm selling some of my Benelli Motorcycles, need to make room.
Two (2) 750 sei which need some work done on them to get them back to
running order.
One (1) 1974 Tornado 650-S with only 620 mile on her. Std Gold in mint
Condition.
Please emil me at benelli-restorationcomcast.net
if interested in any of the above bike or you need more information.
Thanks
Larry S. Saint Cyr
Sunday August 27th
Dirk Delnooz
DfromMol (Dirk from Mol)
Mol is a village in Belgium
I posted a message on the benelli
forum
The bike was found in the garage of my father
A lot of parts are missing (carburettor) suspension ..ect
Now I don't now what to do .. Is it worth to fix it ... Are spare
parts a
problem? Maybe is better to throw it away as old metal and buy
a new one modern one
The only think I wanted to find was a small bike for my son of 10
Is there somebody interested in the parts I have
Dirk Delnooz
Mon Jul 18 2005
che09826bigpond.net.au
250 2C
Do you know of anyone in victoria australia who could renovate a 1974
250 2C benelli
thanks Andrew
Sat Jul 09 2005
jod-electronicscyberlandia.org
José L. Orts
Tengo repuesto para solucionar definitivamente los problemas electricos
de benelli 500 ls. Podeis verlo en www.electronicajoseluis.net
Robotrans: I have spare part definitively to
solve 500 the electricos problems of benelli ls. Podeis to see it in www.electronicajoseluis.net
Sat Jun 11 2005
perrysmcscyahoo
Benelli Parts
Hello, we are in need of some Benelli parts to finish a restoration.
The bike in question is a 1970 250cc horizontal single with a 5 speed gear
box. I believe it's called a Super Sport. If you don't have any parts for
this bike could you please advise us on how to locate them? Thank You for
your help,
Michelle Bushong
Perry's Motorcycles & Sidecars
816 South Sylvania Avenue
Fort Worth, Texas 76111
P: 817-429-9922
Tue May 03 2005
jmcal3156yahoo
1971 dynamo trail bike.
anyone that can help with info. on this bike it would be greatly appreciated
. i think its a 65 cc. it is a 2 stroke , other than that I can't even
figure out how to start this thing. The bike has been kept inside but seems
to be in rough original condition thanks much . jeff
Sat Apr 30 2005
kemetlibero.it
GAS TANK NEED
I would like to find a gas tank for Benelli Barracuda California model
(also called Chuck Connors model).
I like to find also tank and seat fot Benelli Barracuda Metisse model.
Mon Apr 18 2005
piergiorgio12 at virgilio.it
BENELLI 750 6
IF YOUR BENELLI 750 6 IS FOR SALE I SHOULD LIKE MORE AND MORE INFORMATION
THANKS
Date: Sat, 02 Apr 2005
subject: Montgomery Wards Riverside 350
Listed under Wards Riverside
Date: Sat, 26 Mar 2005
subject: Upload of 1981 Benelli 250 Quattro jpgs.
Email: arabbit at earthlink.net
message: Two pics of My Quattro.
Enjoy,
Lon Marshall
Date: Sat, 05 Mar 2005
subject: 125cc Benelli Leoncino 1951
Email: tcgascon at hotmail
message: I'M LOOKING FOR ANY INFO OR PARTS: IE; KICK PEDAL OR THE LION
THAT GOES ON THE FRONT FENDER PLEASE!
Although they don't list the parts you require,
rustedbike.it
may be a good place to start. Ed.
Date: Thu, 24 Feb 2005
subject: Mongomery Wards 125cc model FFA-14016 B
Email: pat00343 at aol
message: Anybody know anything about this trailbike?
A. I believe this is a Benelli. If you have any images of the machine
that would be most helpful. Ed.
Sat, 26 Feb 2005
subject: Riverside 125cc bike
Listed under Wards Riverside
Date: Sat, 12 Feb 2005
subject: Benelli
Email: steve.peace at benelliclubgb.net
message: Please note that the new Website address for theb Benelli
Motobi Club GB is
www.benelliclubgb.net
Date: Thu, 10 Feb 2005
Benelli Mini bike
Email: funmarlin at aol
message: My son, Dylan, recently bought this 1970 Benelli showing only
513 miles at a garage sale in Burlington, Iowa. Unfortunately, we don’t
know the cc, the model or any particulars about this cycle. The tag says
the bike was made in August 1970 and the frame number is 61520. The engine
number is 61947. As far as we can tell, a set of points would put it back
on the trail. Any help would be appreciated. Our e-mail is: funmarlin
at aol
It appears very similar to Benelli
Dynamo Trail 1970 but the kickstart setup differs.
February 10th 2005
Benelli advertisement 1970 at Ebay
Vendors Description:
magazine ad for the 1970 Benelli's sold at Penneys. Featured in text
are: DYNAMO SCRAMBLER, DYNAMO WOODSBIKE, DYNAMO COMPACT & BUZZER
September 30, 2003
750 and 900 sei Benelli parts
I just bought out two warehouses including Cosmo...
See Benelli
Forum
September 29, 2003
I have a 1970 benelli dynamo trail motorcyle in very good condition
looking to sell brought new in 1970 interested email me arutledgela.
-- ARUTLEDGELA at aol
August 5, 2003
I have a 125CC (70's ish).
Does anyone have info regarding the chain size?
Chris -- CWaltman at gentel.net
July 7, 2003
My name is Dave Griffith and I live in Melbourne, Australia. I have
owned a 1970 Benelli Buzzer 65cc Minibike for many years. It is still running,
although it is in need of repairs. I am seeking the following items.....
1. A set of piston rings.
2. Kick start return spring.
3. Throttle assembly.
4. I also require other minor parts including a chain guard, a seat,
plastic cover which is attached to the carby.
I do not know anyone else who owns a Benelli in Melbourne and I would
like to know where I may obtain the above parts. Is there a Benelli owners
club?? What are these bikes worth?? I would appreciate any info that you
may have. Hope you can help.
Regards,
Dave Griffith -- davgriff at hotmail
June 22, 2003
Did Benelli ever make a 175cc Benelli Cobra? Any info would greatly
be appreciated. Thanks -- gmc5 at prodigy.net
May 6, 2003
Hello out there. More than 35 years ago I bought my first bike, a 200
Sprite Benelli. Now, this bike has been stored in Nebraska for the last
33 years. I just took it into daylight and there is indeed a lot of restoration
needed. Unfortunately, I will be unable to restore this bike and am looking
for someone to buy this lovely road race bike and restore it…anyone out
there? All the best. Michael -- mbnel at sbcglobal.net
April 1, 2003
I have a Benelli Dynamo Trail 50cc that I am interested in selling.
It is 95% complete, very restorable, I just don’t have time. It is in New
Zealand, I am happy to provide photos if anyone is interested. It looks
exactly the same as the 65cc version, but I understand it is rarer than
the 65cc version. -- Tui Rutherford -- Tui.Rutherford
at tvsat
March 31, 2003
Hi we need kick start lever and shaft
for 73 benelli buzzer but can't find info on your new site. Can you give
us a lead? --
Thanks,
Mike -- MJM2011
at aol
Peace, We all share the same Universe.
March 30, 2003
I purchased new a 1972 Benelli 175 Enduro. The bike still runs great
and is about to under go a complete restoration. I am looking for an original
gas tank, front and rear brake light switch, and seat or upholstery for
the seat.
I am also looking for a 1972 era Benelli sign.
Thanks for a great service,
Mark Warner -- mwsparky at msn
Portage des Sioux,Missouri
March 4, 2003
not sure what it is S1972 -- Trjohn57 at aol
February 26, 2003
*FOR SALE* 1970 Benelli Buzzer
I'm willing to part out or sell whole. Motor turns over and has
lots of compression. I also have the tail light assy. Use as
a parts bike or restore..... I'm located in New Jersey and could
probably ship it thru UPS. If you have any questions E-mail
me at
hudsonmichael at hotmail
. Thanks! -- Mike Hudson
February 20, 2003
I have a 350 Riverside Benelli that that has been restored ...
Listed under Wards Riverside
February 6, 2003
I saw your e-mail on a benelli site and was wondering if you post classified
ads? I have a 1970 buzzer 65cc I would like to sell. thanks,
mike -- hudsonmichael at hotmail
December 25, 2002
Hallo
for Benelli parts look on my website
www.benelliparts.de
I have a great stock with new and used parts from all models 50 ccm
to 900 ccm. Also I make replika parts for the Benelli`s. If you have new
parts for sale let me know
Detlef Burian -- Burian at t-online.de
November 15, 2002
I am the owner of great 654 T year '81, and I need a manual, specialy
numbers how strongly to screw the bolts, so if someone do have that numbers
I am gladly asking him if he can contact me.
I want to repair the bike. My electric curcuit is down, and machine
had to be opened - yes I assume lot of work for me and my meckenic. Thank
you eweribodi who can help. I love my Benelly, and it is wery nice when
you care. Will send a picture.
If you can help pleas contact me: zdpetran at inet.hr
Zdravko
October 28, 2002
Greetings from sunny Arizona!
I have always been a Triumph man, I have 5 of them, but....I picked
up a rolling basket Benelli 750 SEI. Pretty good shape, 85% complete. I
need: Service manual; parts manual; full set of electrics! (wiring loom,
coils, etc).
The gas tank is there but pretty dinged. I would buy one if I could
find a good one.
Also need a headlamp and headlamp brackets. My email is
fholmes
at route66web
Appreciate any help.
Frank Holmes
October 26, 2002
I have a 654 Benelli and need some engine parts especially I cant find
oil rings . its a four cylinders and the size of the rings is 60*3 mm
--
ricarda.louk at intel
October 15, 2002
1970 Benelli - Serial # 517138
I looking to restore a 1970 – 65 cc motorbike. It
needs a complete gasket kit – o-rings, crank seals, crush washers, etc.
Any information would be greatly appreciated. Thanks, Mac.
--
Walter.McDaniel at ferc.gov
October 11, 2002
I need a set of rims for a (Monkey Wards) Benelli 125. I'm guessing
rims for other Benellis would fit, but I don't know what size. Mine are
buggered up, but my hubs are in good shape. Would someone point me in the
right direction?
--Dave - gorn at nokilli
October 6, 2002
Sell Benelli Leoncino 1952 fully restored fine with documents for export.
This bike is in Italy near Verona Euro 1500 Mobile +393395265773
--
alessandro191054 at interfree.it
September 27, 2002
You want part I have them! I have 1.5 1972 650-S Tornado's, both engines
are fine one was in a fire and the front is missing, and the other is fully
complete. What I don't have are items such as rubbers :), seats,
back tail light sections and silencers. I do have 4 people interested in
some of the parts but no money yet. One engine is going to be broken
down and the other is going to stay as is for now. So if your in need of
some thing email me, if I don't have I just may be able too find it for
you. And if you are in need of silencers for the 650 or a total complete
exhaust system to that 750 sei. I have one setting around and if
that one is gone I can get one for you, so send me an email with your needs
and wants.
Larry S. Saint Cyr -- Benelli-Restoration at attbi
September 18, 2002
I have a mid 70s Moto Villa 50cc kids minibike. i have been told that
the motor was made by Benelli. i am looking to get a set of pistons rings
for it. need to know were I can get them. Thanks Brian -- rblggng
at aol
September 17, 2002
Hi,
I have a 1974 Benelli Dynamo trail mini bike...I need a gear shifter,
clutch cable, throttle twist grip assembly, throttle cable, both front
and rear brake cables, clutch, and brake shoes..
Do anyone have service manual and tech specs for this bike also ??
can you email me a list of parts you do have ??
Thanks, Al -- ac13827 at telocity
September 9, 2002
We recently acquired a 1967 Montgomery Wards Benelli. and would like
to restore it. Could you give us and approximate on how much it is
worth. It runs and needs some TLC. Also trying to locate parts
if needed. -- Thanks Email SKBK958 at Yahoo
September 8, 2002
Looking to purchase Benelli Volcano in excellent condition. --
Gary Robinson, Salem, Oregon -- thus.spoke.zarathustra at
att.net
August 28, 2002
I have come to terms that the Benelli must go,no time to finish it.Ran
last year, frame was striped, primed ( 3 coats) painted Benelli red. In
Great condition. Make an offer......any offer !! -- kenneth.scourse
at sympatico.ca
August 27, 2002
Hello:
I am from Argentina and have a Benelli Leoncino 125CC 1957, I am restoring
this bike, I love it!! I want all information you can give me, such colors,
technical dates, and if you have some photos of it ,,,,do you have the
manual to send it in a mail?????????,I will be very thanks for all information
you could give me!!!!!
I send to you some photos for another motorcycles that I have restored...GUZZI
Lodola y Zigolo,,,,,and the moto Puma 1958 , that was made in Argentina
bye thanks
Nicolas Plescia -- canosa at lacaja.com.ar
Argentina
Bahia Blanca
August 26, 2002
Can anyone tell me if a transmission from a honda cb750 be applied
to a benelli 750 sei. If so, how is this accomplished. please e.mail with
information.
Jackalmanof54 at aol
Thanks, Ron
August 24, 2002
Hi everyone-- I have a 1978 Benelli sei 750 and i am having a Charging
problem. Has anyone used a universal rectifier/voltage regulator {Voltpak
is not making them for the benelli any longer}. Has any one used one from
RICKS MOTORSPORT ELECTRICS and if so which one was used} Any other source
would be appriciated or stock parts are ok also. Is there a trouble shooting
spec sheet for the alternator /generator,rectifier ,voltage regulator.
When i start mine the charge light goes out at about 1200rpm's and
the lights get a little brighter when reved but it only charges from 10.5
volts at idle to about 12.5 when a meter is used accross the battery terminals.
The battery goes right down as this sis not enough to keep the battery
charged. Please e-mail me back at juwa1 at aol
. Thanks Steve
P.S. I would like to ride it for a longer distance before the snow
flies.
August 10, 2002
I am looking for the left side shifter cover that looks like a half
moon. It also covers the drive gear. I also need a carb, and the
left side footpeg. Do you know where I can find these parts?
-- bloveday89 at aol
August 1, 2002
Hi,
I'm looking for some Benelli Tools used on the Benelli Tornado 650-S
with the following part numbers:
ES-1673 - Clutch Drum Wrench
ES-1675 - Gearbox Idle Gear Wrench
ES-2272 - Engine and timing gear wrench
ES-1677 - Oil seal ring pin
ES-1680 - Piston pin puller
ES-1681/1 - Timing adjustment degreed plate
ES-1674 - Crankcase breather wrench
ES-2273 - Clutch discs drum puller
ES-1676 - Kick starter return spring tool
ES-1678 - Clutch adjustment screw driver
ES-1614 - Front hydraulic brake disassembling wrench
ES-1665 - Self locking ring nut wrench
ES-1666 - Self locking ring nut wrench
ES-1679 - Engine and timing gears puller
Thanks
Larry S. Saint Cyr
lsc at attbi
July 31, 2002
I have a 1962 Benelli Barracuda that I am looking to restore . Do you
know any place i can get parts for it. I have looked online and cant find
anything. If you know were i can get some parts for my bike please e-mail
me at insipidcarrot at hotmail
thanks for your time. -- Don Lilly
July 15, 2002
A friend of mine is looking for an original complete exhaust system
to a -76 Benelli 750 sei. Anyone who knows where he can get this? Any hints
appreciated. KK Hageland kk at kjmc.no
July 10, 2002
Hello,
We are in need of a wiring diagram for a 65 cc Benelli (late 60s model).
Anyone who can email us at Smile_goddess4884 at hotmail
let us know and we would be most appreciative :o)
July 9, 2002
Hey, I have been reading a lot of peoples WANTS in your website, which
might I say is terrific, and I just wanted to let you, and everyone else
know that I have parts for these old Benelli Bikes!!!!! From the 50cc Buzzer
to the 900, I have the parts. The company I work for, Cosmopolitan Motors,
used to be the American importer for Benelli and bought out the entire
parts inventory of them for these older models. SOOOO, if you got needs
for these bikes, email me at Pugmyster at aol
, I hope I can be of service to some people, we have parts books for each
model also.
Regards -- Jeremy Puglia -- Pugmyster at
aol
June 14, 2002
To convert from the ridiculous duplex drive chain fitted originally
to the Benelli 900sei, you need the 16 tooth front sprocket from a Yamaha
DT250MX (569-16) and the rear sprocket from the same Yamaha DT250MX (855-47)
if you want the 47 toothsprocket, or the rear sprocket from the XJ600 Diversion
(855-48) if you want the 48 tooth sprocket.
These sprockets require a 520 pitch chain, I'm unsure of the number
of links but if you buy a 130 link chain it's not much more expensive than
the shorter ones and easy to cut to size.
In order to fit the locking plate on the front sprocket drive shaft,
you have to make 3 spacer tubes, one large to fit the shaft and two small
ones to fit the two bolts.
Regards,
Tony Dimech -- anthony.dimech at ntlworld
June 10, 2002
I have a Benelli Buzzer 50cc for sale, blue in color with two person
seat. It needs brake cable and petcock assembly and likely should have
tires replaced. Garaged. Miami, Florida area. Photos available. I will
entertain best reasonable offer.
email: dmwheeler at aaahawk.
June 3, 2002
Could you help me identify this gas tank? Someone told me it
was a Benelli Mojave 250. It is for sale, and I am thinking
of putting it on E-Bay. Thanks for your help. -- Gene
-- lcrump at tsixroads
May 27, 2002
Myself I own a 2001 Gsxr 1000 Suzuki and an 1983 Honda Cr 125; I just
finished restoring.
My father has owned a 1967, 250 Benelli Barracuda since new and it requires
some refacing after spending one year of its life in a field. We decided
to restore the old girl. The machine starts immediately, contains all original
parts, nothing lost, with only 1200 original miles. Basically I am going
to restore it to a new or better appearance. I wish to re-kindle some riding
interest beyond pedaling for my father and I know this to be the ticket!
Can you tell me roughly what its worth, and furnish me with links for
replacing stickers and actual photos of machine as new. Also any advice
or recommendations about having chrome work for the tank done. i.e....who
to look acquire for this job.
I want this machine to stay in our family for years; any advice on preservation
after its done would be fantastic too.
Basically and model specific information or help would be greatly appreciated.
I look forward to hearing from you! Please contact me at the following
email address & thank you in advance ostranderjoeseph at hotmail
If this is posted and read by others, please feel free to contact me
also!
Regards, Joe the Bike Nut
May 16, 2002
I am parting out two 1972 Benelli 650-S / Tornado. Please E-mail me
with your needs. -- Sparepartsracing at cs
May 10, 2002
A good chap for benelli minibike parts is John Brouto of coastsville
penn. near philly,he's usually at mid ohio in july. I'll have some hornet
dynamo stuff there too. Blessings -- Steve
-- perfectparish at hotmail
April 6, 2002
Visit my Benelli 900 sei and 654 sport page. Available in dutch,
english and spanish. My name is Manuel and I'm from Spain and the
URL is
www.benelli.es.vg,
please sign in my guest map. -- Manuel --
benelli
at ozu.es
March 29, 2002
Hi,
I'm looking for a 1970 benelli volcano.can anybody help?bike needs
to be complete.runing is a plus.Also looking for nice to mint benelli minibikes.
Thanks -- gonzo76 at netwiz.net
March 26, 2002
Hello and thanks: I have a great Benelli 500LS and I'm looking for
photos of my engine. If somebody have something I will be eternity told
thank for you.
P.D: I think Benelli are the best motorbikes in the world.
mailto: Indo0035 at latinmail
March 25, 2002
Can you help me find pictures and info about a 1967 Benelli 125 Cobra???
thanks -- mamaleza at juno
March 15, 2002
All I know about this mini is that it has 2 stroke motor with a manual
clutch that says motori zanetti bologna...
March 11, 2002
I have a 1970 Benelli 260, single cylinder that I had found in a guy's
car patio. Underneath about 20 years of clutter I spotted an orange front
fender appearing through. I have since purchased this bike in present condition
with a ceased up piston. After soaking the cylinder for a year and a half
in Marvel Mystery Oil and trying to carefully save the piston and the cylinder
we broke the piston skirt and ruined the sleeve. I am searching for a cylinder
and piston. -- Phil Ragland --
route66 at sandpoint.net
March 10, 2002
hello I just was given a Benelli bike. It's a 65cc compact the
guy I got it from ran it for a couple years and let it lay in his barn
if anyone has parts for me pleeez write me back will pay top dollar ignorantteen420
at hotmail
Sat Sep 02 2006
guentergalsterhot
March 10, 2002
Hi there,
I have just finished rebuilding a Benelli Motorella bike but not sure
what year I think it is about 1972--75 ? Here's a pic. --
Thanks Don --
dmmusic at inet.net.nz
February 17, 2002
Help!!
I'm looking for pistons and cylinders for my 1980 Benelli 900 sei.
Is there anyone who have a set of these or could give me a tip of where
I could find these parts, or even a a complete 900sei engine could be of
interest. If you have any of these items or know anybody who has
please get in in contact with me.
Tel: +46 707883035
E-mail: info at ccmotors.d.se
Regards
Jouni Hänninen SWEDEN
February 12, 2002
I have what I believe is a Montgomery Ward Mojave if anyone has any
info on this bike please e-mail me at dustdobber at aol
February 12, 2002
My first motorcycle was a used 1969 Benelli 125cc 2 stroke street bike
with a 3.5 gallon gas tank, which was sold by Sears as a Riverside 125.
It's long gone now, I abused it to death. -- ailment at
wt.net
Listed under Wards Riverside
Benelli/Motobi group at Yahoo: http://groups.yahoo.com/group/benellis
January 21, 2002
Hi
I have a Benelli 500 Quattro which I am interested in selling. I have
owned the bike for 15 years. Its a 1973 Model and has had the engine re-built
and is mechanically in excellent condition. It requires some cosmetic
work such as the rims re-chroming. The bike is roadworthy and in
overall excellent condition - particularly for its age. I am asking
$4500 AUD. Please reply to daniel.archer at argylediamonds.com.au
January 19, 2002
Hello,
I have a 69 benelli buzzer 50 .I earned it from my father for getting
an A on my report card in 4th grade in 1975. I still have it today
it is all together and did run the last time I tried it back a few years
it is the original candy red. What would it be worth on todays market for
curiosities sake? Thanks! -- Ed Hackett -- decoy35
at aol
January 9, 2002
I am searching for 6/6 exhaust pipes to install on Benelli sei 900
like the sei 750 had. Can this be done and where can I find
pipes. -- Ric 770-535-2772 -- DONRIC4 at aol
December 30, 2001
Hello,
I have a 1970 Benelli Hurricane 65 Mini Bike that I am trying to restore.
I am looking for New Old Stock parts. If anyone knows where I can
find them please let me know. Any help will be greatly appreciated.
I will send pictures to anyone that wants them. Also I have seen
pictures of almost every Benelli Mini bike possible but no Benelli Hurricanes
any pictures send to Marlenyrosa at yahoo
-- Thanks, Rose
December 15, 2001
Hi
We have just dusted off a Benelli motorbike which we would like to
find information on. All we know is the serial no. 8311, has a date 8-1972
and we think it is a 125cc anyone who could shed some light on this for
us would be appreciated.
Thank you -- Colin and Pat --
colin-and-pat at
xtra.co.nz
December 11, 2001
Trying to source fenders, headlight and tail light for a 1969 Benelli
Buzzer. Any info would be helpful awebbfire at yahoo
Thanks, Andrew W
December 4, 2001
I have a Benelli 750 SEI, ca. 1977...
See Benelli
Forum
November 23, 2001
Here's what I have learned about the 1970 Tornado...
See Benelli
Forum
November 23, 2001
Dear Benelli Wizard -
I have a friend with a 1983 Benelli 900 Sei that is looking for a set
of aftermarket exhaust pipes...
See Benelli
Forum
November 8, 2001
What do I have?
I just picked up a very unique looking Benelli,
at a local salvage yard, for $50. They had just acquired it about a month
ago or so. Engine number is NL*4879*. Have not been able to locate the
frame number yet. Looking at photos of bikes that I found on 'Benelli
Club Nederland' site, I compared it to a 1958 125cc 4T. (The headlight
bracket, rear fender, and the front down-tube part of the frame that connects
to the engine, and the engine configurations all match). The tank on the
bike, however, looks larger, and the paint scheme looks like that of a
'68 Sprite/'67 Riverside/'65-'67 MotoBi Imperiale. Are the tanks on these
motorcycles interchangeable, or could a past owner just painted the original
tank to match the later models? Mine also has the seat strap that the rear
passenger would hang onto while riding; did not notice this on the 4T.
The headlight, hanging by the wires down to the front axle, looks like
it does not have any switches, but does have a square, clouded-over instrument
gauge on it. Is this a speedo or volt-meter?
Restored, or in it's present 'a truck must have run over it' condition,
what could this be worth?
I found this bike at Paul's M/C Salvage in Hiram ,
Ga., just in case the previous owner is out there.
Drew Mobley -- drew.mobley at gtrc.gatech.edu
Georgia Tech Research Corporation
859 Spring Street, NW
Atlanta, Ga 30308
404-385-0449 (w)
404-385-2078 (f)
Mailing List:
BENELLI-MOTOBI:
DESCRIPTION: A list for the Benelli and MotoBi marques
DIGEST AVAILABLE? Yes
ADMIN ADDRESS: listproc at micapeak
TO SUBSCRIBE: Message body: "subscribe BENELLI-MOTOBI person's name"
LIST OWNER: benelli-motobi-owner
at micapeak.com
WWW URL: http://www.eurospares.com
October 31, 2001
I just acquired a 1974 Benelli Volcano 180cc minibike. I need a parts
listing/manual, a throttle cable, a taillight, points and maybe some other
stuff. Can anyone help me? -- Thanks, -- Don Foote
-- Dallas, TX -- donlfoote at msn
October 31, 2001
Subject: Exhaust Benelli 750 Sei /76...
See Benelli
Forum
October 15, 2001
Anyone have a Benelli Dynamo? ...
See Benelli
Forum
October 14, 2001
Hello,
Ran across this site and have to ask a couple of questions.
In 1966 2 of my buddies and I bought 3 Montgomery Ward Riverside 125
cc motorcycles made by Benelli, they were blue in color. Does anyone know
where I might buy one? Where can I get parts for it,manuals etc. and are
there any clubs for these little bikes??
Any and all info is very much appreciated.
e-mail me at dowtyloganrec.com
-- Thank you, -- Doug
September 16, 2001
I have some brand new parts for sale for Benelli and other motorcycles
and/or mopeds. They may not be current models, but they are in their original
sealed cartons.
Complete tail light assembly and lens cover.
CEV 12-Volt moped or cycle horn, and CEV 6-Volt horns.
CEV red plastic tail lens covers
General Electric 6-Volt Supurban Auto Headlamp. #6006.
Other new parts for Jawa mopeds.
billy97 at mailcity
September 6, 2001
Wanted : Benelli 350-4 (350RS I believe )...
See Benelli
Forum
August 2, 2001
Hi, my name is Susan and I am in need of any information on a Benelli
Buzzer 65cc...
See Benelli
Forum
July 11, 2001
Hi,
My name is Charlton Benelli and I came across your web page.
My father and I are Benelli owners and enthusiasts. We have a 750
SEI and a 650 Tornado. Please respond to heelsndwchterraworld.net
Thanks,
Charlton
July 6, 2001
Subject: 1970 Benelli bike
Looking for a parts dealer for 1970 Benelli... any info on one
please write me.
Thanks, Shane -- sparks15009 at yahoo
June 7, 2001
Where is the best place to find a small Benelli from the 70's?
Robert Alinovi -- ralinovi at yahoo
May 15, 2001
Hi,
Another new site to add to the list.
The Benelli Motobi club GB -- www.benelli-motobi.net
cheers -- Webby -- webmaestro at benelli-motobi.net
March 30, 2001
Hi,
I just bought a Benelli Motorella (50cc.). It runs great but I'm looking
for (a copy) of a manual.
Saluti,
Thom Fransen -- thom.fransen at kuehne-nagel
March 11, 2001
Hey folks,
I have a 1973 benelli 90cc, 2 stroke motorcycle that I am restoring,
any information on this type of bike would be great. if anyone has any
information on parts that would also be great. I've found that working
on this bike here in Pennsylvania is quite a chore, mostly because it is
very hard to find parts or information on the bike. any info would be greatly
appreciated. thanks. -- Jeremy Rosencrance -- jcrose
at cyber-quest
March 29, 2001
Biker, I just came across your Benelli page. I see that there haven't
been too many entries on it lately, but I thought you might want to set
up this link as he has a lot of Benelli parts available. It has been perhaps
4 months since I got the list from him. I hope it will help someone. Another
good source is www.roadandrace.com.au
. These guys are in Australia, and do a good job for owners of older Ducati,
Benelli and other European bikes, especially singles. Enjoy! Dennis Martin
http://www.angelfire.com/mn2/divco/wardsriverside.html
Dennis Martin -- dennism at oswego.net
February 26, 2001
RE: 1970 Benelli 125cc Sport Special
I brought this bike over from Italy about 5 years ago, it sat in my
uncles garage in Bari. This bike is now completely restored in it's
original condition except for some sticker stickers that go on the storage
compartments and pin stripping on the tank.
If anyone knows where I can get these from, please let me know at jmarzin
at caemachinery.com
Thanks
Jerry
February 14, 2001
I have a 250 2c phantom ...
See Benelli
Forum
January 20, 2001
Hi, I trying to find a covered moped in the US such as the BMW
C1 or the Benelli Adiva. Do you know of anybody that's importing
them? Or do you know of similar models for sale here? --
Thanks for your help. -- Tam Su -- tamsu1 at
yahoo
January 16, 2001
For sale. My 1971 125cc Sport Special was imported from Bari
Italy. This bike was given to me by my uncle after sitting under
a sheet of plastic for 15 years. The motor was re-build but like
I said, it sat for 15 years untouched. There is a small leak coming
from the center gasket but nothing to worry about, all other gaskets have
been replaced recently. The bike itself has been completely restored
from the ground up including re-chroming of parts.
I hate to do this but I would like to sell this beautiful bike with
the intention of getting another bigger bike.
No reasonable offer will be refused. -- Jmarzin at caemachinery
January 11, 2001
Hello. Came across your web site and was hoping someone can tell me
what Benelli I have. The serial number is 423820. Thanks. --
lsteinme
at tampabay.rr
January 4, 2001
Hi, I am looking for a manual and someone I can talk to about Benelli
bikes. I am in the process of redoing a 1969 or 1970's model Benelli buzzer.
Will you e-mail me asap with info on how to get in touch with someone on
how to get stuff for this benelli. If at all possible a phone number on
who to get in touch with. -- jamie l walker --
bigsnail2000
at lycos
December 16, 2000
I bought a Benelli 750 Sei about 18 years ago and rode it around for
a couple of years... was originally won in a Motorcycle News (UK magazine)
competition...
See Benelli
Forum
December 10, 2000
Hi webmaster
My name is Graham, I am in the process of building a 250cc four stroke
racer,I have a Zanzani replica frame, competition forks and most of the
engine. What I need is a crankshaft for the four speed model and
a cylinder head that has been well ported for racing or competition use.
Is there anyone out there who can assist please ??
Many thanks. -- GRAHAM KEEBLE -- KEEBLE
at motorest.fsnet.co.uk
November 31, 2000
We've just aquired a Montgomery Wards Riverside (aka. Benelli) 125cc
2 stroke Motorcycle. The Wards Model Number is FAA-61-14016 B, Serial No.
66. We are looking for any info on the bike (year made, repair manual and
especially a parts source). If anyone can help please e-mail. -- Randy
McCardell -- mccardell_randy at hotmail
November 20, 2000
Benelli owners,
For those of you in the US looking for parts there is a good stock
at a former importer in Pennsylvania. They have supplied parts for
my '76 500 Quattro in the past.
Cosmopolitan Motors
Hatboro, PA
(800) 523-9100
Andrew -- afiore1 at umbc.edu
October 24, 2000
Just pulled a Benelli 250-2 out from a tree, but is now beginning to
look like an ol racer. Couple problems and questions, please.Front
forks are locked and I refuse to drill it! 2 "locksmith*s",tryed but could
not pick. Is the voltage regulator, in headlight bucket, mainly for
lights?, as all wires going in are yellow=lights? Want it only for
oval track out here on the ranch in New Mexico, so headlight, seat, plate
bracket, pipes, will be sold or given away. -- Bill Pearce
New Mexico, ....by way of Truro, Cornwall County, about 160 years ago.
any help would be,,,,helpfull -- tmcghee at unm.edu
October 12, 2000
I've just picked up a 69 Dynamo Comfort...
See Benelli
Forum
October 7, 2000
ALL;
GREAT SITE.....I HAVE A 1966 BENELLI MINIBIKE, AND THAT'S ALL I KNOW
ABOUT IT. Can anyone look at the picture and tell me what size
and the name of it? -- Ken Scourse --
kenneth.scourse
at sympatico.ca
September 12, 2000
I just got a 65 Bennelli. I think it is a 200. Would that make
it a Sprite? It is in really good shape but I still need several
things for it. Can anyone help? -- Chan Cornett
-- Chan65 at prodigy.net
July 29, 2000
hello we are SCOMOTO CLASSIC RACING and are currently well known in
the UK for racing Benelli 2 strokes. we are however close to completeing
a replica of the works Malanca 50 racer and would
like any info that anyone has on these machines, words and pics please,
this way we will make the bike look as authentic as possible when its out
on the tracks -- Chris Schofield -- FishB at
Terrabit.Net
July 28, 2000
I own a '69 FULL RACE Barracuda. This bike was used for hill climbing
in the early '70s claiming several titles. It's been handed down to me
by family and friends, and now I'm contemplating a restoration to its modified
state. What I'm looking for is the shop manual, {I have the original parts
and price manuals} motor gaskets, a rebuild kit for the carburetor or complete
carburetor.
From what I understand the motor was built by a shop in Daytona, the
red line on the tach is at 13,000 RPM. The swing arm is still stock, this
being run before the thought of extending swing arms.
Before being stored away 15 years ago it ran very strong and very loud
with open header and megaphone.
Any information on this motor and parts availability will be greatly
appreciated!
Vern, -- Shelbyville, Michigan USA --
vschwarz
at accn.org
July 18, 2000
I am restoring 2 Benelli 500 LS one for my wife and the other for me.
Both are originally in colour blue/black that was the most popular in Spain.
As far as I know, another colour combination available was pearl grey /black,
but I don't like it very much.
I have been told there was an option combining red. Does anyone know
about it? Did anyone see that combination? I would thank someone to send
me a picture.
Does anyone know another colour combination?
Thanks -- Miguel -- maiza at retemail.es
July 1, 2000
I have a complete 78, 79 Benelli 750 SEi needs
TLC to get it back on the road. Good original paint. MAKE AN OFFER,
NEED THE ROOM IN THE GARAGE. -- allent at frazmtn
June 14, 2000
Over 10 years ago I acquired a set of Benelli, type 2502C, model year
1974. Both bikes are fitted with a drum brake...
See Benelli
Forum
June 12, 2000
I have a Italian 1972 650s tornado Benelli...
See Benelli
Forum
May 29, 2000
I am looking for some parts for my sons 1972 Benelli Banshee 90...
See Benelli
Forum
May 18, 2000
I need information about a brand new benelli motocycle with a roof
like the BMW C1, where can I get one in Austria?????????
Mex Mediaworx Burkhard Kratzer -- me.x at sbg.at
May 16, 2000
My name is Brandon Zamel, and I am interested in Benelli bikes. My
mother's friend is giving me a 1974-5 (?) 650 tornado. ...
See Benelli
Forum
May 10, 2000
I'm from Denmark and i got a 750 SEI...
See Benelli
Forum
April 22, 2000
G'day there , I'm only interested in the new Benelli "tornado tre Novecentro".
Any facts, tests, delivery dates, prices etc would be greatly appreciated,
It looks awesome. cheers -- kiwiwookie at hotmail
April 20, 2000
Just found your website. I'm looking for pictures of a Benelli
moped (50cc). >>>
April 9, 2000
Hi to all you Benelli riders,
some good news if you are struggling to find some spares for your machines...
See Benelli
Forum
April 3, 2000
I have recently acquired a 1979 250c.c. 4 Cylinder Benelli...
See Benelli
Forum
April 2, 2000
I have been searching for a Benelli 50cc from the 60's or 70's for
about 10 years now and I still ...
See Benelli
Forum
March 21, 2000
Directly from the historicalBENELLI
S.P.Aestablishments, viale Mameli,22
PESARO ( ITALY ), by an important manager of the race department (1962-1970),we
have a very equipped store rich of original and brand-new replacement pieces
formopeds and motorcycles made by
BENELLI-MOTOBI from year 1965 to 80's (De Tomaso ).
The
replacement pieces are for the following models:
1-MOPEDS
City Bike - Motorella - mini Bike (3 - 4 speed gearbox)
- Dynamo Trail(65cc) - Dynamo Compact(50cc) - Mini Cross - Mini Enduro
- Volcano - Trial - cross 5V - sport 3 V - Export FA/3VKS - America - California
- Gentlemen - Bobo - Sprint 3-4V.
2-MOTORCYCLES
Sport Special 125 cc - Sport Special 250 cc - Leoncino
Cross 125 cc - Tornado S/S2 650 cc - 125 2C E- 250 2C E - 125BX CROSS -
254(4cil) - 350RS(4cil) - 500LS(4cil) - 504 Sport(4cil) - 654(4cil) - 750(6cil)
- 906(6cil).
We also remind you that all our materiales are still
kept brand-new in their original boxes, those could be sold " in block"
and NOT for single replacement pieces sales.
For more information:
nardidei at vil.it
fax :0039/55-2479398
Florence - ITALY
March 11, 2000
I have a '68 Montgomery Ward/Benelli (don't know the model) 2-stroke
single cylinder motorcycle sitting in my garage. I'll be restoring
it this summer, and was wondering if anyone could tell me what they know
about it. It's at http://www.fallsnet.com/~deffinba/hog [404]
James Deffinbaugh -- stupowers at yahoo
March 11, 2000
I bought a 350cc Benelli from the mid seventies with 12 km on the clock.
The bike was never registered or used. The Engine was never started,
in the flout chamber was Oil und also in the Petrol tank. Due to
the long storing time the chrome parts are partially rusty. I am
really very interested to ride this bike in the next season.
Greetings from Austria. -- Franz Danner --
office
at turbinen-danner.at
February 23, 2000
I have a Benelli 750 sei, I acquired this bike recently and I'm looking
for the engine chain stretcher...
See Benelli
Forum
February 10, 2000
My 1985 mod. 900 SEI have a little oil leak from...
See Benelli
Forum
February 6, 2000
I Have a 1979 Sei purchased new, now have 19K miles, only minor items
replaced plugs, points, chain and sprockets. Have Marving header,
K&N filters, runs great good bike. -- Tom Beasley
--
tomjean at en
January 29, 2000
I have two Benellis: 750 Sei -84 (on papers ?) and Tornado 650 S2 -76.
I can't find spare parts from Finland. Can anyone help me? I need urgently
set of standard size (diameter 56 mm thickness 3 mm) oil / scraper rings
for Sei. -- matti.tahlo at iobox.fi
January 24, 2000
I am thinking of buying a Benelli LS500 which has been stored in a
shed for the last 14 years. It has done 8000 miles (apparently!). It looks
like everything is original but I have never seen one like this before.
Does anyone know what the availability of parts is like and are they expensive?
Also, what do they run like - basically any information at all about this
bike would be appreciated. (PS I am in Edinburgh Scotland).
chris_kirke
at earth73.freeserve.co.uk
January 17, 2000
Looking for a Benelli 1969 - 1971 50cc Dynamo Compact or 65cc Dynamo
Trail bike for my son...
See Benelli
Forum
December 13, 1999
I have a 1968 Wards Riverside Benelli 350cc Touring Motorcycle complete
with title, owner's manual and parts list. It is in poor condition and
does not run. Probably it would be best as a parts bike. Or a wonderful
restoration opportunity. Located in Washington DC. I switched to a bicycle
years ago and would like to find a place for my old motorcycle. Anybody
interested? -- ArtistCJL at aol
November 24, 1999
I have a Benelli/Montgomery Ward 250cc four stroke parts bike (circa
1967). Engine or trans appears to be locked up from lack of use,
engine missing only valve cover. Would like to keep the frame and
wheels, but will consider parting out all or anything. Bike is in South
Carolina. I can be contacted at Lutherfirm at aol
October 31, 1999
I am selling my Benelli 200 Sprite - nice machine, all original and
complete in every way. No reasonable offer refused. Just don't have the
room in the garage. Located in Michigan USA --
John Savage -- Sold November 1,
1999
Thanks for your help on the Benelli 200; It's been sold. Thanks again.
John Savage
September 27, 1999
Does anyone know of any Benelli clubs or websites? I have two Benelli's,
one 250 2c that I use everyday and one Buzzer that sits under the house
collecting dust (with only 128 miles from new!!). What I would really like
is a 1950's to 1960's Benelli approximately 250cc to 350cc. If you have
one for sale or know of where on is please contact me. In the meantime
lets keep the marque alive. -- Seth -- sethgriffiths
at hotmail
September 24, 1999
We have just acquired a Benelli Motorcycle and we are looking for some
information about it. The engine and frame number is 416131. It reads Motobi
125cc 4T on the side of the gas tank. In the front it reads Benelli Pesaro
Imperiale. We were told it is a 1959 but, we are not sure. If you have
any knowledge about this particular bike, please let us know. Very much
appreciated. -- Gordon Ponsford -- gponsfor
at bellsouth.net
September 15, 1999
Good to see a site trying to keep Benelli's on the move. I bought
my 750 Sei in 1979 with 800 miles...
See Benelli
Forum
I need some info on a Benelli 125 I have just purchased. -- Regards
-- Frank Rosen - South Africa -- frosen at kingsley.co.za
September 8, 1999
As I read in a MOTO 73 issue, Benelli recently introduced and showed
a new 3-cylinder 900 cc motorbike. Prominent features: watercooling system
beneath buddyseat with 2 canary-yellow fans/outlets in the rear of the
bike; beautiful fairing, etc. etc.
If this one ever hits the road (and according to Benelli it will in
the beginning of 2001) it will be a hit! -- Hans de Vries mailto:hdvr
at wish.net
Italian Specialists in Benelli Motorcycles --javier at bertran.net
-- www.bertran.net/benelli [404]
Read your web site with interest I have 900sei but the main thing a
excellent parts source of most models...
See Benelli
Forum
I am located in Minnesota, and through the years I have had numerous
Benelli's. I have owned the 125, the 250, the 350 and the 360 Ward's
models. I have also owned the 650 Tornado and currently own a 750
SEI. I have loved the handling characteristics of all these bikes
but, have not been enamored with there reliability. All these bikes
have been of excellent condition. If you have any questions about
any of these bikes or have a Quattro basket case let me know. --
Dadokeha02
at aol
I'm going to put a lot of stuff related to the 2 stroke 125 on web.
I own a Benelli 125 2C SE (1976) since it was produced. I just started
so the number of pages will increase. So visit:
http://members.xoom.com/benelli125 [404] -- Regards
-- Angelo Zumbo -- A.zumbo at rete.telecomitalia.it
I just found your site after numerous searches for Benellis in the past.
I have a 1970 Dynamo Trail, or what I have been told is a Dynamo Trail
with only 132.5 original miles on it. It is almost complete with only the
tools, manual and original air filter missing. The tires are
in like new condition, the exhaust pipe hasn't blued from heat, the gas
line hasn't discolored from fuel flowing through it, and the seat is in
very good condition without any tears or rips, just some slight scuff marks.
Sadly the gas tank needs to be cleaned of the internal rust and chemically
lined, the headlight housing to be rechromed, and the front forks scratched.
But the bike is in remarkable condition after 28 years.
I include a picture for you to post since this may be one of very few
such bikes left in this condition. I am also interested in
selling this bike, since I am not an avid collector and enjoy riding more
than polishing.
Sincerely,
Walt Moskalow wmosk at hotmail.com
PS: If you would like more photos of this bike, please email. I also
know someone who has a Benelli Volcano who would probably share photos
of his very nice bike.
Benelli Bikers Club Holland : www.Benelli.club.tip.nl [404]
Motobi Bikers Club Holland : www.Motobi.club.tip.nl [404]
For all your questions you've always wanted to ask about Benelli Bike's.
Please send us everything you want to tell about Benelli and your experiences
you have with driving them. -- Berry Holleman --
Berry.Holleman at inter.NL.net
May 24, 1999
1968 Montgomery Ward Riverside 250cc
I had the above motorcycle (Benelli import) back in 1980 when I was
15 in San Diego, CA..The bike was almost mint (original tires, paint, onboard
tool kit & low mileage...around 200-300). I would sneak the bike
out at night ( no license, registration, insurance or helmet) & once
I got it started it was a running machine even though the gear shift was
on the wrong side. But it was a bear to start, probably tight from
being new, & more times than not I would abandon the kick start to
do a rolling jump start (Hey I was only 15!).I know I have at least one
picture of the Riverside, but lost its location when I left San Diego at
16.
Sincerely; -- Mac in NYC -- Maddmacs at webtv.net
May 23, 1999
I purchased a Benelli 125 with front disc brake, orange tank shaped
like a small SEI, and 125 on side covers. The paint job appears to be original.
1 clock. Can you put a year on the bike? Also an approximate value. I paid
about $150 US. -- Regards -- Frank Rosen
-- frosen at kingsley.co.za
April 17, 1999
I have a late 60's 250 Barracuda in less than good shape. The bike
has only 150 miles on the odometer but needs work. I need a service manual
with wiring schematic. Also any parts help would be appreciated. --
Tadt -- whosnext at ideas.nu
April 14, 1999
Hi! Need stuff (manuals, chain, diagrams, etc..) for a Benelli 175
(circa 1970's?)... Only readable # is *LP72512*F -- Thanks
-- -Jeff -- jtt at ndak.net
April 10, 1999
My father gave me a Benelli sei that he purchased new...
See Benelli
Forum
April 10, 1999
Is there any information you can give us on the value or how to get
the best price for a Benelli 125 cc motorcycle, distributed by Montgomery
Ward in the late 60's. (probably 1968) The motorcycle is restored for the
most part, but still some minor work to be in original condition. Pictures
are available. -- Kingosabe at aol.com
February 25, 1999
Greetings. I have a 650 and a 750 Benelli I have installed a Honda
gear box in my 750....
See Benelli
Forum
January 29, 1999
I am the proud owner of an early 50's Benelli Leoncino (51-52?)...
See Benelli
Forum
December 17, 1998
I once had a '68 Benelli Cobra 125cc, it was my first bike, bought
it from a friend for $100, damn what a fun little worn out machine, wish
i now had a picture of it, if anyone has a picture of one I'd appreciate
a copy. Thanks,
Jeff JEFFHDCAP at aol
I just purchased a little motorcycle and it has a Benelli sticker on
it. It's a 1972, very clean and in very good condition. There
is another one available with a little more wear on it, but still in very
good condition. Both bikes fire right up and are in very good working
condition. Are these bikes worth something to collectors? Just trying to
figure out if I should buy the other bike. Do you know where I can
get more information about these little bikes? --
Jona31 at aol
November 30, 1998
I just picked up this cute little blue gem and I need some NOS parts
to complete it. There is supposed to be a place in Lockport NY. That has
lots of NOS stuff, esp. for the 50cc. Minibikes.I think it is called
Cole`s Cycle. ...
See Benelli
Forum
November 19,1998
Just a short note to let you know that I too have a Benelli. It is
a 1974 Quattro. 500cc, 4 cyl. It hasn't been ridden much ...
See Benelli
Forum
October 29, 1998
It's surprising how many Benelli owners are out there, I'm looking
for certain parts to complete my 750 Sei...
See Benelli
Forum
Hi everyone,
I've just started an email list for the Benelli and MotoBi marques.
After a little testing and fine tuning this morning the list seems to be
up an running OK, so I'm letting everyone know that it is available.
To subscribe you'll send your message to:
majordomo at list.sirius.com
The list has both individual and digest (accumulation of messages issued
as one message) modes, so the body of the message will read either:
subscribe benelli-motobi youremailaddresshere
or
subscribe benelli-motobi-digest youremailaddresshere
depending on which version you want.
As with my other 6 lists, I'll be keeping the new list closed to non-member
posts which has proven to be effective in keeping the spammers out.
I'll be letting Carl Paukstis know about the list so he can include it
in the November issue of the mailing list roundup.
Cheers,
Michael Moore mmoore at sirius
Euro Spares, SF CA
Distributor of Lucas RITA and Powerbase products
Sole North American distributor of "The Racing Motorcycle: a technical
guide for constructors"
Host of 6 m/c email lists (details on the web site)
http://www.eurospares.com
AFM/AHRMA #364
From: Pete McDonald [mailto:mcdonald at mailbag]
Sent: Sunday, August 02, 1998 9:09 PM
I found out I have a Benelli 65cc Dynama....
See Benelli
Forum
> - we've had the Barracuda for a while, and were wondering what it
might be worth if in reasonable running order ..... any thoughts on this
? - later, Ron
Hello Ron,
I paid $300 for my 5 speed. It wasn't complete or real nice, but did
come with a NOS fuel tank and a spare 4 speed engine.
I have a small list of MotoBi/Benelli owners that exchange email in
an informal list - they post something to me (once and awhile) and I send
it back out to everyone else. There are several very knowledgeable people
on the list (including Peter Oort who runs the Dutch MotoBi Amici web site).
If you or anyone else wants to have your name added to that just drop me
a line. I think I can assure you your mailbox won't be overflowing if you
do!
Cheers,
Michael Moore mmoore at sirius
Euro Spares, SF CA
Distributor of Lucas RITA and Powerbase products
Sole North American distributor of "The Racing Motorcycle: a technical
guide for constructors"
Host of 6 m/c email lists (details on the web site)
http://www.eurospares.com
AFM/AHRMA #364
I've been looking for Benelli sites for two weeks, finding nothing.
I then found this place, cool. I just picked up a 1968 360cc cafe
racer painted screaming yellow and missing a couple of little things.
It has clip-ons, racing tires, and came with parts and service manuals.
I'm looking for someone to talk to who can give a little tech. support.
I'm not the one who took it apart so I'm not real sure how it goes back
together. The body more closely resembles the Montgomery Ward Mojave
but with some small differences. Anybody that would like to lend
their know-how I would be greatly indebted
Thanks
stymie Styme17 at aol.com
10/4/98
I am looking for fork dust seals for a 250/4. Also looking for motor
parts for a 900 Sei (this one is turbo charged.)
See Benelli
Forum
Hi, Just noticed some postings for Benelli parts. I have three possible
sources. Cosmopolitan Motors used to be the distributor. They
have some parts left. fax number 215-956-9654, attn Jimmy.
The best luck I have had so far is with James Dennis. His email address
is Motobi at tradenet.net. He buys and sells Benelli parts. He has been
a great help.
Another person I found was Dave Moot who bought up an old dealers supply
of parts. His email address is MWeinerman at aol.com
-- ErinItaly at aol.com
Benelli Motorcycles
If you have a query about Benelli motorcycles, or wish to share
your knowledge of these classic Italian machines, please contact
us!
Search Wikipedia:
